w1n5t0n/memlnaut-nisps
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
memlnaut-nisps/firmware
History
monkey-w1n5t0n 3952c65d75 feat(firmware): on-device Joystick Dual/Single settings menu 
Add glue/settings_view.hpp: wire_settings(mode) registers a "Joystick"
SingleSelectView on the MEMLNaut display carousel (TFT + rotary encoder, same
DisplayDriver as SystemView/SelfTest). For the 4-input two-joystick modes,
"Single" pins ML input channels 2,3 (the second joystick) to neutral via
ModeBase::set_input_pinned — the network is never rebuilt and trained state
survives toggling. Default is Dual. Only registered when input arity == 4.

Called from MEMLNaut-NISPS.ino setup() after addSystemInfoView(). MAP.md +
CLAUDE.md glue listings updated.

NOTE: compile-unverified — no arduino-cli/RP2350 toolchain on this host and no
hardware; needs scripts/build-firmware.sh + a flash test (chokepoint A).
2026-06-28 21:17:51 +02:00
..
MEMLNaut-NISPS feat(firmware): on-device Joystick Dual/Single settings menu 2026-06-28 21:17:51 +02:00
README.md Stream 6: extract firmware glue under firmware/ 2026-04-29 17:05:38 +03:00

README.md

firmware/ — Arduino sketch + hardware glue

Thin shell around nisps/. The platform-agnostic ML / DSP / engines / modes live there; this directory contains:

  • MEMLNaut-NISPS.ino — entry point. Picks one mode at compile time, hosts the dual-core lifecycle (Core 0: ML + UI, Core 1: audio + MIDI), and connects glue to mode.
  • glue/audio_driver.hpp — bridges memllib's AudioDriver block callback to Mode::process(stereosample_t). Templated trampoline so no virtual dispatch in audio path.
  • glue/peripherals.hpp — wires MEMLNaut joystick / pots / buttons to Mode::set_input(idx, value) and the ML primitives (draw_weights, move_weights, train, reset).
  • glue/midi_io.hpp — binds incoming MIDI to mode.note_on/note_off/update_bpm/set_playing (where supported); drains outgoing ControlEvents from the mode's ring buffer to the MIDI UART.
  • glue/input_router.hpp — wire_inputs() entry point, currently a thin re-export over peripherals. Will grow into a schema-aware router.
  • glue/output_router.hpp — drains engine events + mode events; called from loop1().
  • glue/mode_select.hpp — type aliases mapping MEMLNautMode<Name> identifiers to nisps::modes::<Name>Mode C++ types. Build script rewrites MEMLNAUT_MODE_TYPE between the alternatives.

Building

scripts/build-firmware.sh                # interactive variant prompt
scripts/build-firmware.sh PAFSynth       # build a specific variant
scripts/build-and-flash-firmware.sh      # build + flash via UF2

Target: rp2040:rp2040:solderparty_rp2350_stamp_xl:opt=Optimize3 with compiler.cpp.extra_flags=-std=gnu++20.

Include paths

Arduino-CLI compiles every *.cpp / *.hpp reachable from the sketch directory and from any submodule under src/. Headers under nisps/ are included via relative path (#include "../../nisps/..."). No -I flag injection needed.

src/memllib and src/daisysp are git submodules; the firmware-common.sh wrapper rejects builds when submodules drift from the recorded revision.

Verification

You cannot test on hardware from a sandbox. We verify three things:

  1. arduino-cli compile succeeds for at least three modes (PAFSynth, ChannelStrip, BreakOr).
  2. Host C++ tests in nisps/build still pass — the firmware refactor must not perturb the platform-agnostic library.
  3. git grep confirms no remaining references to deleted root-level files.

Removed

  • Root-level MEMLNaut-NISPS.ino, IMLInterface.hpp, *AudioApp.hpp, XiasriAnalysis.{cpp,hpp} — replaced by nisps/engines/* and firmware/MEMLNaut-NISPS.ino.
  • Root-level modes/MEMLNautMode*.hpp and modes/AudioApps/ — replaced by nisps/modes/* and the mode_select.hpp type aliases.
  • Root-level voicespaces/ — replaced by static voice space data inlined into engines (nisps/engines/paf_synth.hpp etc.).
  • src/memlp/ submodule — replaced by nisps/ml/.