ea588e79cd
Phase 1 group 3 (L3, L9, L4, L5, L6, ST1). - L3: nisps/modes/voice_space.hpp — entirely dead, no includes anywhere. - L4: deleted SawOsc and SquareOsc. KEPT SineOsc — a verifier caught that the original reviewer's grep missed its live consumer (the firmware selftest); re-confirmed here before touching the file. - L9: removed the no-op VoiceSpace enum/table/setter boilerplate from the five engines with no real voice spaces; kept it on PAFSynth, VerbFX and ChannelStrip, which have real ones. Every engine member was checked against nisps/wasm/bindings.cpp, firmware/ and tests/ for callers first. - L5: ModeBase::input_dirty_ was write-only state — deleted the flag rather than making it gate inference, which would have been a behaviour change. - L6: VerbFXEngine's delay_to_verb_ (computed 12x per block, never read), enable_reverb_, enable_delay_to_reverb_ and the unused set_enable_* setters. - ST1: rewrote the four engine header comment blocks that described implementations which do not exist. L7 (MEMLCeliumEngine's inert feedback path) is deliberately NOT done — tracing git history showed feedbackGain went 0.1f (live) -> "0; //0.1f" (explicitly muted, value preserved) -> dropped entirely in the port. That is a muted feature, not dead weight, and deleting it would silently lose it. Left intact pending an operator decision; see the phase report. Gates: run-all-tests.sh ALL GREEN.
316 lines
14 KiB
C++
316 lines
14 KiB
C++
// nisps/engines/memlcelium.hpp — Dual-voice PAF synth driven by a 2-track
|
||
// ratio sequencer. Mirrors firmware MEMLCeliumAudioApp.
|
||
//
|
||
// Param layout (from `MEMLCeliumAudioApp::ProcessParams`):
|
||
// [0..13] — sequencer (2 sequences × 7 ratio-seq params)
|
||
// [14..55] — synthesis (V0 + V1, 42 params total)
|
||
//
|
||
// Voice 0 (3 PAF operators): base freq, 3× cf, 3× bw, vib, vfr, 3× shift,
|
||
// amp ADSR (attack/decay/sustain/release), pitch envelope, pitch emphasis,
|
||
// shape gain/asym/mix, ring-mod gain. (~22 params)
|
||
//
|
||
// Voice 1 (3 PAF operators): base freq, detune1/2, 3× cf, 3× bw, 3× shift,
|
||
// amp ADSR, pitch envelope, pitch emphasis. (~20 params)
|
||
//
|
||
// The sequencer fires note events internally to trigger V0/V1 envelopes.
|
||
// `pop_events()` exposes that same NoteOn/NoteOff/Clock stream (as BreakOr
|
||
// and Elysiamorf do), but no mode currently drains it — MEMLCeliumMode is a
|
||
// pure synth with no MIDI/I2C output wired for this engine.
|
||
|
||
#pragma once
|
||
|
||
#include <array>
|
||
#include <cmath>
|
||
#include <cstddef>
|
||
#include <span>
|
||
#include <string_view>
|
||
|
||
#include "../core/concepts.hpp"
|
||
#include "../core/perf.hpp"
|
||
#include "../core/types.hpp"
|
||
#include "../dsp/env.hpp"
|
||
#include "../dsp/osc.hpp"
|
||
|
||
namespace nisps {
|
||
|
||
class MEMLCeliumEngine {
|
||
public:
|
||
static constexpr std::size_t kNParams = 56u;
|
||
static constexpr std::size_t kNSequences = 2u;
|
||
static constexpr std::size_t kSeqParamsEach = 7u;
|
||
|
||
static constexpr std::size_t param_count() noexcept { return kNParams; }
|
||
static constexpr std::string_view engine_id() noexcept { return "memlcelium"; }
|
||
|
||
void setup(float sample_rate) noexcept {
|
||
sample_rate_ = sample_rate;
|
||
for (auto* op : {&v0_paf0_, &v0_paf1_, &v0_paf2_,
|
||
&v1_paf0_, &v1_paf1_, &v1_paf2_}) {
|
||
op->init();
|
||
op->setsr(sample_rate);
|
||
}
|
||
v0_amp_env_.setup(500.f, 500.f, 0.8f, 1000.f, sample_rate);
|
||
v0_pitch_env_.setup(10.f, 500.f, 0.f, 100.f, sample_rate);
|
||
v1_amp_env_.setup(500.f, 500.f, 0.8f, 1000.f, sample_rate);
|
||
v1_pitch_env_.setup(10.f, 500.f, 0.f, 100.f, sample_rate);
|
||
bar_phasor_ = 0.f;
|
||
bar_phasor_inc_ = 0.f;
|
||
update_bpm(120.f);
|
||
sequencing_sample_counter_ = 0u;
|
||
}
|
||
|
||
void set_params(std::span<const float> params) noexcept {
|
||
if (params.size() < kNParams) return;
|
||
// ---- sequencer (params 0..13) ----
|
||
for (std::size_t s = 0u; s < kNSequences; ++s) {
|
||
const std::size_t base = s * kSeqParamsEach;
|
||
float sum = 0.f;
|
||
for (std::size_t i = 0u; i < 3u; ++i) {
|
||
seqs_[s].ratios[i] = static_cast<float>(static_cast<int>(params[base + i] * 3.f)) + 1.f;
|
||
sum += seqs_[s].ratios[i];
|
||
}
|
||
seqs_[s].ratio_sum = sum;
|
||
static const float muls[4] = {1.f, 2.f, 4.f, 8.f};
|
||
seqs_[s].phasor_mul = muls[static_cast<int>(params[base + 3] * 3.999999f) & 3];
|
||
seqs_[s].phase_off = static_cast<float>(static_cast<int>(params[base + 4] * 4.f)) * 0.25f;
|
||
sum = 0.f;
|
||
for (std::size_t i = 0u; i < 2u; ++i) {
|
||
seqs_[s].amp_ratios[i] = static_cast<float>(static_cast<int>(params[base + 5 + i] * 3.f)) + 1.f;
|
||
sum += seqs_[s].amp_ratios[i];
|
||
}
|
||
seqs_[s].amp_ratio_sum = sum;
|
||
}
|
||
// ---- synthesis (params 14..55) ----
|
||
std::size_t i = 14u;
|
||
auto sq = [&]() { const float p = params[i++]; return p * p; };
|
||
|
||
base_freq_ = 60.f + (params[i++] * 10.f);
|
||
v0_paf0_cf_ = params[i++] * 2.f;
|
||
v0_paf1_cf_ = params[i++] * 2.f;
|
||
v0_paf2_cf_ = params[i++] * 2.f;
|
||
v0_paf0_bw_ = 10.f + (params[i++] * 100.f);
|
||
v0_paf1_bw_ = 10.f + (params[i++] * 100.f);
|
||
v0_paf2_bw_ = 10.f + (params[i++] * 100.f);
|
||
v0_paf_vib_ = sq() * 0.01f;
|
||
v0_paf_vfr_ = sq() * 15.f;
|
||
v0_paf0_shift_ = -100.f + (params[i++] * 200.f);
|
||
v0_paf1_shift_ = -100.f + (params[i++] * 200.f);
|
||
v0_paf2_shift_ = -100.f + (params[i++] * 200.f);
|
||
{
|
||
const float a = 0.01f + (params[i++] * 1.f);
|
||
const float d = 0.5f + sq() * 200.f;
|
||
const float s = 0.01f + (params[i++] * 0.5f);
|
||
const float r = 1.f + sq() * 800.f;
|
||
v0_amp_env_.setup(a, d, s, r, sample_rate_);
|
||
}
|
||
{
|
||
const float a = 0.01f + (params[i++] * 3.f);
|
||
const float d = 0.5f + sq() * 100.f;
|
||
v0_pitch_env_.setup(a, d, 0.f, 0.1f, sample_rate_);
|
||
}
|
||
v0_pitch_emph_ = params[i++] * 50.f;
|
||
v0_shape_gain_ = params[i++];
|
||
v0_shape_asym_ = params[i++] * 0.5f;
|
||
v0_shape_mix_ = params[i++];
|
||
rm_gain_ = params[i++];
|
||
|
||
v1_base_freq_ = 300.f + (params[i++] * 10.f);
|
||
v1_detune1_ = 1.f + (params[i++] * 1.f);
|
||
v1_detune2_ = 1.f + (params[i++] * 1.f);
|
||
v1_paf0_cf_ = params[i++] * 2.f;
|
||
v1_paf1_cf_ = params[i++] * 2.f;
|
||
v1_paf2_cf_ = params[i++] * 2.f;
|
||
v1_paf0_bw_ = 10.f + (params[i++] * 400.f);
|
||
v1_paf1_bw_ = 10.f + (params[i++] * 600.f);
|
||
v1_paf2_bw_ = 10.f + (params[i++] * 500.f);
|
||
v1_paf0_shift_ = -500.f + (params[i++] * 1000.f);
|
||
v1_paf1_shift_ = -300.f + (params[i++] * 600.f);
|
||
v1_paf2_shift_ = -100.f + (params[i++] * 200.f);
|
||
{
|
||
const float a = 0.01f + (params[i++] * 1.f);
|
||
const float d = 0.5f + sq() * 100.f;
|
||
const float s = 0.01f + (params[i++] * 0.3f);
|
||
const float r = 1.f + sq() * 200.f;
|
||
v1_amp_env_.setup(a, d, s, r, sample_rate_);
|
||
}
|
||
{
|
||
const float a = 0.01f + (params[i++] * 3.f);
|
||
const float d = 0.5f + sq() * 100.f;
|
||
v1_pitch_env_.setup(a, d, 0.f, 0.1f, sample_rate_);
|
||
}
|
||
v1_pitch_emph_ = params[i++] * 10.f;
|
||
}
|
||
|
||
NISPS_HOT NISPS_FORCE_INLINE stereosample_t process(stereosample_t /*x*/) noexcept {
|
||
// Sequencer tick — one decision per `kSequencingSampleDiv` audio
|
||
// samples to keep CPU bounded; matches firmware's `sequencingSampleDiv = 400`.
|
||
if (sequencing_sample_counter_ == 0u) {
|
||
bar_phasor_ += bar_phasor_inc_;
|
||
if (bar_phasor_ >= 1.f) bar_phasor_ -= 1.f;
|
||
for (std::size_t i = 0u; i < kNSequences; ++i) {
|
||
auto& s = seqs_[i];
|
||
float seq_phasor = bar_phasor_ * s.phasor_mul;
|
||
seq_phasor = std::fmod(seq_phasor + s.phase_off, 1.f);
|
||
const bool trig = ratio_seq_3(seq_phasor, s.ratio_sum, s.ratios, 0.5f);
|
||
const bool high_amp = ratio_seq_2(seq_phasor, s.amp_ratio_sum, s.amp_ratios, 0.5f);
|
||
if (trig && !s.last_trig) {
|
||
const std::uint8_t velocity = high_amp ? 127u : 64u;
|
||
const float v = static_cast<float>(velocity) / 127.f;
|
||
const float vsq = v * v;
|
||
if (i == 0u) { v0_amp_env_.trigger(vsq); v0_pitch_env_.trigger(1.f); }
|
||
else { v1_amp_env_.trigger(vsq); v1_pitch_env_.trigger(1.f); }
|
||
} else if (!trig && s.last_trig) {
|
||
if (i == 0u) { v0_amp_env_.release(); v0_pitch_env_.release(); }
|
||
else { v1_amp_env_.release(); v1_pitch_env_.release(); }
|
||
}
|
||
s.last_trig = trig;
|
||
}
|
||
}
|
||
++sequencing_sample_counter_;
|
||
if (sequencing_sample_counter_ >= kSequencingSampleDiv) sequencing_sample_counter_ = 0u;
|
||
|
||
// ----- Voice 0 -----
|
||
const float v0_env = v0_amp_env_.play();
|
||
const float v0_p = v0_pitch_env_.play() * v0_pitch_emph_;
|
||
const float fbsmooth = (fbzm1_ * fb_smooth_alpha_) + (feedback_ * (1.f - fb_smooth_alpha_));
|
||
fbzm1_ = fbsmooth;
|
||
const float freq0 = base_freq_ * (1.f + fbsmooth) + (v0_p * base_freq_);
|
||
const float p0 = v0_paf0_.play(freq0, freq0 + (v0_paf0_cf_ * freq0),
|
||
v0_paf0_bw_, v0_paf_vib_, v0_paf_vfr_, v0_paf0_shift_, false);
|
||
const float freq1 = freq0 * 1.01f;
|
||
const float p1 = v0_paf1_.play(freq1, freq1 + (v0_paf1_cf_ * freq1),
|
||
v0_paf1_bw_, v0_paf_vib_, v0_paf_vfr_, v0_paf1_shift_, true);
|
||
const float freq2 = freq1 * 1.02f;
|
||
const float p2 = v0_paf2_.play(freq2, freq2 + (v0_paf2_cf_ * freq2),
|
||
v0_paf2_bw_, v0_paf_vib_, v0_paf_vfr_, v0_paf2_shift_, true);
|
||
float v0 = (p0 + p1 + p2) * v0_env;
|
||
|
||
// ----- Voice 1 -----
|
||
const float v1_env = v1_amp_env_.play();
|
||
const float v1_p = v1_pitch_env_.play() * v1_pitch_emph_;
|
||
const float v1f0 = v1_base_freq_ + (v1_p * v1_base_freq_);
|
||
const float v1p0 = v1_paf0_.play(v1f0, v1f0 + (v1_paf0_cf_ * v1f0),
|
||
v1_paf0_bw_, 0.f, 0.f, v1_paf0_shift_, false);
|
||
const float v1f1 = v1f0 * v1_detune1_;
|
||
const float v1p1 = v1_paf1_.play(v1f1, v1f1 + (v1_paf1_cf_ * v1f1),
|
||
v1_paf1_bw_, 0.f, 0.f, v1_paf1_shift_, true);
|
||
const float v1f2 = v1f1 * v1_detune2_;
|
||
// Note: firmware has a bug where this line uses `freq2` (V0's freq),
|
||
// but we faithfully port it for sonic parity.
|
||
const float v1p2 = v1_paf2_.play(v1f2, v1f2 + (v1_paf2_cf_ * freq2),
|
||
v1_paf2_bw_, 0.f, 0.f, v1_paf2_shift_, true);
|
||
float v1 = v1p0 + v1p1 + v1p2;
|
||
const float rm = v1p0 * v1p1 * v1p2;
|
||
v1 = ((1.f - rm_gain_) * v1) + (rm * rm_gain_);
|
||
v1 = v1 * v1_env;
|
||
|
||
// ----- Mix + sine shaper -----
|
||
float mix = v0 + v1;
|
||
static const float kTwoPi = 6.28318530717958647692f;
|
||
float shape = std::sin(mix * kTwoPi);
|
||
shape = std::sin((shape * kTwoPi * v0_shape_gain_) + v0_shape_asym_);
|
||
mix = mix + (shape * v0_shape_mix_);
|
||
mix = std::tanh(mix);
|
||
return {mix, mix};
|
||
}
|
||
|
||
DriverConfig driver_config() const noexcept {
|
||
DriverConfig c;
|
||
c.output_volume = 0.9f;
|
||
return c;
|
||
}
|
||
|
||
void update_bpm(float bpm) noexcept {
|
||
bpm_ = bpm;
|
||
const float beat_seconds = 60.f / bpm;
|
||
const float bar_seconds = beat_seconds * 4.f; // assume 4/4
|
||
const float bar_samples = bar_seconds * (sample_rate_ / static_cast<float>(kSequencingSampleDiv));
|
||
bar_phasor_inc_ = 1.f / bar_samples;
|
||
}
|
||
|
||
void set_playing(bool playing) noexcept {
|
||
if (!playing) {
|
||
bar_phasor_ = 0.f;
|
||
sequencing_sample_counter_ = 0u;
|
||
for (auto& s : seqs_) { s.last_trig = false; }
|
||
v0_amp_env_.release(); v0_pitch_env_.release();
|
||
v1_amp_env_.release(); v1_pitch_env_.release();
|
||
}
|
||
}
|
||
|
||
private:
|
||
static constexpr std::size_t kSequencingSampleDiv = 400u;
|
||
|
||
struct SeqState {
|
||
std::array<float, 3> ratios{1.f, 1.f, 1.f};
|
||
std::array<float, 2> amp_ratios{1.f, 1.f};
|
||
float ratio_sum = 3.f;
|
||
float amp_ratio_sum = 2.f;
|
||
float phasor_mul = 1.f;
|
||
float phase_off = 0.f;
|
||
bool last_trig = false;
|
||
};
|
||
|
||
template <std::size_t N>
|
||
static bool ratio_seq(float phasor, float ratio_sum,
|
||
const std::array<float, N>& ratios,
|
||
float pulse_width) noexcept {
|
||
float offset_phase = phasor;
|
||
if (offset_phase >= 1.f) offset_phase -= 1.f;
|
||
const float phase_adj = ratio_sum * offset_phase;
|
||
float accum = 0.f, last = 0.f;
|
||
for (std::size_t i = 0u; i < N; ++i) {
|
||
accum += ratios[i];
|
||
if (phase_adj <= accum) {
|
||
const float beat_phase = (phase_adj - last) / (accum - last);
|
||
return beat_phase <= pulse_width;
|
||
}
|
||
last = accum;
|
||
}
|
||
return false;
|
||
}
|
||
static bool ratio_seq_3(float p, float s, const std::array<float, 3>& r, float pw) noexcept {
|
||
return ratio_seq<3>(p, s, r, pw);
|
||
}
|
||
static bool ratio_seq_2(float p, float s, const std::array<float, 2>& r, float pw) noexcept {
|
||
return ratio_seq<2>(p, s, r, pw);
|
||
}
|
||
|
||
float sample_rate_ = 48000.f;
|
||
float bpm_ = 120.f;
|
||
|
||
PAFOperator v0_paf0_, v0_paf1_, v0_paf2_;
|
||
PAFOperator v1_paf0_, v1_paf1_, v1_paf2_;
|
||
ADSR v0_amp_env_, v0_pitch_env_;
|
||
ADSR v1_amp_env_, v1_pitch_env_;
|
||
|
||
std::array<SeqState, kNSequences> seqs_;
|
||
float bar_phasor_ = 0.f;
|
||
float bar_phasor_inc_ = 0.f;
|
||
std::size_t sequencing_sample_counter_ = 0u;
|
||
|
||
// Synth state.
|
||
float base_freq_ = 60.f;
|
||
float v0_paf0_cf_ = 0.f, v0_paf1_cf_ = 0.f, v0_paf2_cf_ = 0.f;
|
||
float v0_paf0_bw_ = 50.f, v0_paf1_bw_ = 50.f, v0_paf2_bw_ = 50.f;
|
||
float v0_paf_vib_ = 0.f, v0_paf_vfr_ = 0.f;
|
||
float v0_paf0_shift_ = 0.f, v0_paf1_shift_ = 0.f, v0_paf2_shift_ = 0.f;
|
||
float v0_pitch_emph_ = 0.f;
|
||
float v0_shape_gain_ = 0.f, v0_shape_asym_ = 0.f, v0_shape_mix_ = 0.f;
|
||
float rm_gain_ = 0.f;
|
||
|
||
float v1_base_freq_ = 300.f;
|
||
float v1_detune1_ = 1.f, v1_detune2_ = 1.f;
|
||
float v1_paf0_cf_ = 0.f, v1_paf1_cf_ = 0.f, v1_paf2_cf_ = 0.f;
|
||
float v1_paf0_bw_ = 50.f, v1_paf1_bw_ = 50.f, v1_paf2_bw_ = 50.f;
|
||
float v1_paf0_shift_ = 0.f, v1_paf1_shift_ = 0.f, v1_paf2_shift_ = 0.f;
|
||
float v1_pitch_emph_ = 0.f;
|
||
|
||
float feedback_ = 0.f;
|
||
float fbzm1_ = 0.f;
|
||
float fb_smooth_alpha_ = 0.5f;
|
||
};
|
||
|
||
static_assert(AudioEngine<MEMLCeliumEngine>, "MEMLCeliumEngine must satisfy AudioEngine");
|
||
|
||
} // namespace nisps
|