Compare commits

..

3 commits

Author SHA1 Message Date
monkey-w1n5t0n
acb8cb7696 feat(manifold): browser-only extra gate-sequence tracks (spare net outputs)
The WASM net is fixed at MLP<32,..,126>; MEMLCelium uses the first 56 outputs,
so [56..125] are computed-but-unused. Borrow them as extra RatioSeq tracks —
native tracks 0-1 read the real rhythm [0..13] (audio-synced), browser-only
tracks 2+ read the spare window [56,63,..] → up to 12 tracks total. Firmware
stays at 2; no engine reshape.

- cv-backend: rhythmBases track->output-base mapping + setRhythmLayout.
- useBackendManager: RHYTHM_LAYOUTS keyed by engine (memlcelium = 2 native, 56
  params), builds native+spare bases up to the net width.
- Outputs UI helper text; spec updated with the real (non-reshape) mechanism.

Caveat (documented): one shared net, so RL feedback on the synth also nudges the
extra tracks — true independence needs the separate Rhythm MLP (not yet built).
2026-06-29 00:15:39 +02:00
monkey-w1n5t0n
1461779e23 feat(manifold): gate sequences in the CV backend (RatioSeq) — SLP-Workshop
Implements the spec's rhythm stream for the uSEQ CV backend, on the existing
slp_workshop/MEMLCelium engine (its outputs [0..13] are the 2 RatioSeq tracks).

- ratio-seq.ts: faithful TS port of the engine's gate generator (decode 7
  params/track, ratio_seq pulse test, 4/4 bar clock). Unit-tested (5 tests).
- CV backend: gate channels run as a clock-driven Sequence (RatioSeq track from
  the rhythm output slice [track*7..]) or a continuous Threshold; BPM-synced to
  the app tempo; one eval per track per tick.
- CvSpec gains gateSource ('sequence'|'threshold') + seqTrack; per-gate UI in
  the Outputs panel; bpm threaded through useBackendManager.

Next (spec Build Deltas): MIDI note on/off from gate edges; gate-sequence count
+ shared/separate-net toggle + per-input-channel routing; engine 2nd MLP head.
2026-06-28 23:06:20 +02:00
monkey-w1n5t0n
b853113ac1 feat(useq-cv): flash scripts per board + handshake status in Outputs panel
- scripts/flash-useq-main.sh + scripts/flash-useq-expander.sh: build + flash
  each uSEQ board via PlatformIO (nix-shell fallback for pio; extra args pass
  through; BOOTSEL hint).
- CV backend: green status now means a CONFIRMED handshake, not just an open
  port. Any valid device->host frame (the firmware streams INPUT at 20 Hz, or an
  identify ack) flips it ready/green; a 2.5s watchdog after open surfaces a red
  'no response from module' if nothing replies. idle/grey when nothing connected.
- Outputs panel CV config: explicit handshake indicator (coloured dot + label —
  green 'Module handshake OK' / amber waiting / red error / grey not connected).
- Docs: firmware README + MAP.md note the scripts.
2026-06-28 22:39:02 +02:00
14 changed files with 580 additions and 58 deletions

1
MAP.md
View file

@ -112,6 +112,7 @@ the "BUILD DELTAS" block at the top of `vcv/SPEC.md`). `src/MEMLNaut.cpp` (modul
### `scripts/` — build + verify entry points ### `scripts/` — build + verify entry points
- `build-firmware.sh`, `flash-firmware.sh`, `build-and-flash-firmware.sh`, `firmware-common.sh` — Arduino-CLI wrapper for RP2350 target with C++20 flag. - `build-firmware.sh`, `flash-firmware.sh`, `build-and-flash-firmware.sh`, `firmware-common.sh` — Arduino-CLI wrapper for RP2350 target with C++20 flag.
- `flash-useq-main.sh`, `flash-useq-expander.sh` — build + flash the uSEQ-CV firmware (`firmware/useq-celium/{main,expander}`) via PlatformIO (nix-shell fallback for `pio`).
- `build-wasm.sh` — Emscripten compile producing `playground/public/nisps.{wasm,js}`. - `build-wasm.sh` — Emscripten compile producing `playground/public/nisps.{wasm,js}`.
- `build-cpp-tests.sh` — CMake configure + build + ctest (Ninja). - `build-cpp-tests.sh` — CMake configure + build + ctest (Ninja).
- `parity-check.sh` — runs native + WASM and diffs binary outputs. - `parity-check.sh` — runs native + WASM and diffs binary outputs.

View file

@ -104,13 +104,21 @@ vary sequence count.
### Browser (Manifold) — dynamic, switchable live ### Browser (Manifold) — dynamic, switchable live
Same three **plus** a fourth, and with **as many ratio sequences as the user wants** Same three **plus** a fourth, and with **more ratio sequences than the firmware's 2**.
(each gate sequence = its own independent 7-param track; the net reshapes to suit):
- **Continuous & Rhythm (split nets)** — Continuous MLP + a separate Rhythm MLP. **How extra tracks work (IMPLEMENTED, 2026-06-29).** The browser WASM net is fixed
Browser-only (two MLP heads; hardware uses one). `output_size`: shared net = at `MLP<32,…,126>` — it does **not** reshape per mode. MEMLCelium maps the first
`continuous + 7 × n_gates` (mind the 126-output WASM cap → ~16 gates max shared); 56 outputs (14 rhythm + 42 synth); outputs **[56..125] are computed but unused**.
split net = the Rhythm net is sized independently, so it scales further. So the browser borrows them: native tracks 0–1 read the real rhythm at [0..13]
(in sync with the audio); browser-only tracks 2+ read the spare window
[56, 63, …] — **up to 12 tracks total** ((126−56)/7 = 10 extra). The firmware is
untouched (still 2). Caveat: it's ONE shared net, so RL feedback that shapes the
synth also nudges the extra tracks — they are not *independently* trained. (Per-
engine layout lives in `manifold/src/backends/useBackendManager.ts` `RHYTHM_LAYOUTS`.)
- **Continuous & Rhythm (split nets)** — Continuous MLP + a separate, independently
trained Rhythm MLP. Browser-only, NOT yet built — this is the upgrade that
decouples the extra tracks from the synth (two MLP heads; hardware uses one).
The browser mode is implied by the Outputs config (§4), not a separate picker: The browser mode is implied by the Outputs config (§4), not a separate picker:
choosing continuous-count > 0 and gate-sequences = 0 ⇒ Continuous-only; choosing continuous-count > 0 and gate-sequences = 0 ⇒ Continuous-only;

View file

@ -27,12 +27,22 @@ expander/ uSEQ expander: I2C slave → CV4..11 (8× PWM)
The main board forwards CV4–CV11 to the expander over I2C (addr `0x10`, 400 kHz) The main board forwards CV4–CV11 to the expander over I2C (addr `0x10`, 400 kHz)
and rescans every 2 s until the expander is found (hot-attach friendly). and rescans every 2 s until the expander is found (hot-attach friendly).
## Build / flash (PlatformIO) ## Build / flash
Convenience scripts (resolve PlatformIO via `nix-shell` if `pio` isn't on PATH;
extra args pass through to `pio`, e.g. `--upload-port /dev/ttyACM0`):
```bash ```bash
# main board scripts/flash-useq-main.sh # build + flash the main module
cd firmware/useq-celium/main && pio run -e main -t upload scripts/flash-useq-expander.sh # build + flash the expander
# expander board ```
If an upload can't auto-reset the board, hold **BOOTSEL** while plugging in USB.
Raw PlatformIO, equivalently:
```bash
cd firmware/useq-celium/main && pio run -e main -t upload
cd firmware/useq-celium/expander && pio run -e expander -t upload cd firmware/useq-celium/expander && pio run -e expander -t upload
``` ```

View file

@ -31,10 +31,15 @@ import {
encodeOutput, encodeOutput,
FRAME_IDENTIFY_LEN, FRAME_IDENTIFY_LEN,
} from './useq-protocol'; } from './useq-protocol';
import { RatioSeqEngine, decodeTrack } from './ratio-seq';
const SEND_INTERVAL_MS = 1000 / STREAM_HZ; // ~10 ms const SEND_INTERVAL_MS = 1000 / STREAM_HZ; // ~10 ms
const CV_DEAD_ZONE = 8; // on the 12-bit value (~0.2%) const CV_DEAD_ZONE = 8; // on the 12-bit value (~0.2%)
const IDENTIFY_TIMEOUT_MS = 5000; const IDENTIFY_TIMEOUT_MS = 5000;
const MAX_TRACKS = 16; // gate-sequence RatioSeq tracks (7 rhythm params each)
// The firmware streams INPUT frames at 20 Hz, so a live module proves itself
// within ~50 ms. Allow for a USB-CDC (DTR) reset on open before giving up.
const HANDSHAKE_TIMEOUT_MS = 2500;
/** Resolve a channel id into a fast {kind, index} target (or null for 'none'). */ /** Resolve a channel id into a fast {kind, index} target (or null for 'none'). */
type Target = { kind: 'cv'; idx: number } | { kind: 'gate'; idx: number } | null; type Target = { kind: 'cv'; idx: number } | { kind: 'gate'; idx: number } | null;
@ -57,10 +62,14 @@ export class UseqCvBackend implements OutputBackend {
private writer: WritableStreamDefaultWriter<Uint8Array> | null = null; private writer: WritableStreamDefaultWriter<Uint8Array> | null = null;
private reader: ReadableStreamDefaultReader<Uint8Array> | null = null; private reader: ReadableStreamDefaultReader<Uint8Array> | null = null;
private parser = new UseqRxParser( private parser = new UseqRxParser(
() => {}, () => this.onDeviceFrame(), // any INPUT frame proves the module is alive
(ok) => this.onAck(ok), (ok) => this.onAck(ok),
); );
/** True once a valid device→host frame has been received (handshake OK). */
private handshook = false;
private handshakeTimer: ReturnType<typeof setTimeout> | null = null;
private cvVals = new Uint16Array(NUM_CV); // last computed 12-bit CV per channel private cvVals = new Uint16Array(NUM_CV); // last computed 12-bit CV per channel
private gateBits = 0; private gateBits = 0;
private lastCv = new Int32Array(NUM_CV).fill(-1); private lastCv = new Int32Array(NUM_CV).fill(-1);
@ -68,6 +77,19 @@ export class UseqCvBackend implements OutputBackend {
private lastSendMs = 0; private lastSendMs = 0;
private writing = false; // in-flight write guard (avoid serial backpressure) private writing = false; // in-flight write guard (avoid serial backpressure)
// Gate sequencer (the rhythm stream): RatioSeq tracks decoded from the rhythm
// slice of the routed output vector. `trackDone` memoises one eval per tick.
private seq = new RatioSeqEngine();
private trackGate = new Uint8Array(MAX_TRACKS);
private trackDone = new Uint8Array(MAX_TRACKS);
/**
* track → output base index for the 7-param rhythm slice. The native tracks
* point at the engine's real rhythm params; browser-only extra tracks borrow
* the net's spare outputs (beyond the engine's param count). Empty ⇒ contiguous
* `track*7` fallback. Set by the dock from the active engine's layout.
*/
private rhythmBases: number[] = [];
private pendingIdentify: (() => void) | null = null; private pendingIdentify: (() => void) | null = null;
private statusState: BackendStatus = { state: 'idle', message: 'CV idle' }; private statusState: BackendStatus = { state: 'idle', message: 'CV idle' };
@ -84,7 +106,11 @@ export class UseqCvBackend implements OutputBackend {
return; return;
} }
if (this.port) { if (this.port) {
this.setStatus({ state: 'ready', message: 'uSEQ connected' }); this.setStatus(
this.handshook
? { state: 'ready', message: 'uSEQ handshake OK' }
: { state: 'connecting', message: 'uSEQ port open — waiting for module…' },
);
return; return;
} }
// Try to silently re-open a previously-granted port (no user gesture needed). // Try to silently re-open a previously-granted port (no user gesture needed).
@ -97,14 +123,14 @@ export class UseqCvBackend implements OutputBackend {
} catch { } catch {
/* ignore — fall through to the idle "connect" prompt */ /* ignore — fall through to the idle "connect" prompt */
} }
this.setStatus({ state: 'ready', message: 'uSEQ ready — click Connect device' }); this.setStatus({ state: 'idle', message: 'No uSEQ — click Connect device' });
} }
setContext(ctx: BackendContext): void { setContext(ctx: BackendContext): void {
this.ctx = ctx; this.ctx = ctx;
} }
/** Update the per-output CV specs (channel + gate threshold). */ /** Update the per-output CV specs (channel, gate source/track/threshold). */
setCvConfig(specs: CvSpec[]): void { setCvConfig(specs: CvSpec[]): void {
this.specs = specs; this.specs = specs;
this.targets = specs.map((s) => resolveTarget(s.channel)); this.targets = specs.map((s) => resolveTarget(s.channel));
@ -112,6 +138,20 @@ export class UseqCvBackend implements OutputBackend {
this.lastGateBits = -1; this.lastGateBits = -1;
} }
/** Tempo for the gate sequencer (BPM, 4/4). */
setBpm(bpm: number): void {
this.seq.setBpm(bpm);
}
/**
* Set the rhythm track → output-base mapping (per active engine). Native tracks
* read real rhythm params; browser-only extra tracks read the net's spare
* outputs. Pass `[]` to fall back to contiguous `track*7`.
*/
setRhythmLayout(bases: number[]): void {
this.rhythmBases = bases;
}
/** User-gesture path: pick + open a serial port. Throws if the user cancels. */ /** User-gesture path: pick + open a serial port. Throws if the user cancels. */
async connect(): Promise<void> { async connect(): Promise<void> {
if (!this.isAvailable()) { if (!this.isAvailable()) {
@ -123,7 +163,7 @@ export class UseqCvBackend implements OutputBackend {
try { try {
port = await navigator.serial.requestPort(); port = await navigator.serial.requestPort();
} catch { } catch {
this.setStatus({ state: 'ready', message: 'uSEQ ready — click Connect device' }); this.setStatus({ state: 'idle', message: 'No uSEQ — click Connect device' });
return; // user dismissed the picker return; // user dismissed the picker
} }
await this.open(port); await this.open(port);
@ -140,11 +180,43 @@ export class UseqCvBackend implements OutputBackend {
this.writer = port.writable?.getWriter() ?? null; this.writer = port.writable?.getWriter() ?? null;
this.lastCv.fill(-1); this.lastCv.fill(-1);
this.lastGateBits = -1; this.lastGateBits = -1;
this.handshook = false;
if (typeof port.addEventListener === 'function') { if (typeof port.addEventListener === 'function') {
port.addEventListener('disconnect', () => this.handleDisconnect()); port.addEventListener('disconnect', () => this.handleDisconnect());
} }
this.startReadLoop(); this.startReadLoop();
this.setStatus({ state: 'ready', message: 'uSEQ connected' }); // Port is open, but a handshake isn't confirmed until the module talks back.
this.setStatus({ state: 'connecting', message: 'uSEQ port open — waiting for module…' });
this.armHandshakeWatchdog();
}
/** If no device frame arrives within the timeout, surface a clear error. */
private armHandshakeWatchdog(): void {
this.clearHandshakeWatchdog();
this.handshakeTimer = setTimeout(() => {
this.handshakeTimer = null;
if (this.port && !this.handshook) {
this.setStatus({
state: 'error',
message: 'No response from module — check firmware / cable, then Identify',
});
}
}, HANDSHAKE_TIMEOUT_MS);
}
private clearHandshakeWatchdog(): void {
if (this.handshakeTimer !== null) {
clearTimeout(this.handshakeTimer);
this.handshakeTimer = null;
}
}
/** A valid device→host frame arrived → the module is alive (handshake OK). */
private onDeviceFrame(): void {
this.clearHandshakeWatchdog();
if (this.handshook) return;
this.handshook = true;
if (this.port) this.setStatus({ state: 'ready', message: 'uSEQ handshake OK' });
} }
private async startReadLoop(): Promise<void> { private async startReadLoop(): Promise<void> {
@ -175,22 +247,30 @@ export class UseqCvBackend implements OutputBackend {
if (!w) return; if (!w) return;
const frame = new Uint8Array(FRAME_IDENTIFY_LEN); const frame = new Uint8Array(FRAME_IDENTIFY_LEN);
encodeIdentify(frame); encodeIdentify(frame);
this.setStatus({ state: 'connecting', message: 'Identify… (watch the LEDs)' }); this.setStatus({ state: 'connecting', message: 'Identify sent — watch the LEDs…' });
let settled = false; let settled = false;
const done = (msg: string) => { const done = (s: BackendStatus) => {
if (settled) return; if (settled) return;
settled = true; settled = true;
this.pendingIdentify = null; this.pendingIdentify = null;
if (this.port) this.setStatus({ state: 'ready', message: msg }); if (this.port) this.setStatus(s);
}; };
this.pendingIdentify = () => done('uSEQ connected — identify ack'); this.pendingIdentify = () => done({ state: 'ready', message: 'uSEQ handshake OK — LEDs flashed' });
w.write(frame).catch(() => done('uSEQ connected')); w.write(frame).catch(() => done({ state: 'error', message: 'Identify failed — module not responding' }));
setTimeout(() => done('uSEQ connected'), IDENTIFY_TIMEOUT_MS); setTimeout(
() =>
done(
this.handshook
? { state: 'ready', message: 'uSEQ handshake OK' }
: { state: 'error', message: 'No identify ack — check firmware / cable' },
),
IDENTIFY_TIMEOUT_MS,
);
} }
private onAck(ok: boolean): void { private onAck(_ok: boolean): void {
this.onDeviceFrame(); // an ack is also proof the module is alive
if (this.pendingIdentify) this.pendingIdentify(); if (this.pendingIdentify) this.pendingIdentify();
else if (ok && this.port) this.setStatus({ state: 'ready', message: 'uSEQ connected' });
} }
send(routed: Float32Array): void { send(routed: Float32Array): void {
@ -200,11 +280,16 @@ export class UseqCvBackend implements OutputBackend {
const now = typeof performance !== 'undefined' ? performance.now() : Date.now(); const now = typeof performance !== 'undefined' ? performance.now() : Date.now();
if (now - this.lastSendMs < SEND_INTERVAL_MS) return; if (now - this.lastSendMs < SEND_INTERVAL_MS) return;
// Advance the gate-sequencer clock every tick (even if we end up not
// transmitting), clamping any backgrounded-tab jump.
const dt = Math.min(0.1, (now - this.lastSendMs) / 1000);
this.lastSendMs = now; this.lastSendMs = now;
this.seq.advance(dt);
if (this.writing) return; // previous frame still draining — drop this one if (this.writing) return; // previous frame still draining — drop this one
// Rebuild the 14-channel snapshot from the routed outputs. // Rebuild the 14-channel snapshot from the routed outputs.
this.cvVals.fill(0); this.cvVals.fill(0);
this.trackDone.fill(0);
let gates = 0; let gates = 0;
const n = Math.min(routed.length, ctx.mappings.length, this.targets.length); const n = Math.min(routed.length, ctx.mappings.length, this.targets.length);
for (let i = 0; i < n; i++) { for (let i = 0; i < n; i++) {
@ -212,11 +297,15 @@ export class UseqCvBackend implements OutputBackend {
if (!t) continue; if (!t) continue;
const m = ctx.mappings[i]; const m = ctx.mappings[i];
if (isSilent(m)) continue; if (isSilent(m)) continue;
const mapped = mapOutput(routed[i], m); // 0..1 in [min,max]
if (t.kind === 'cv') { if (t.kind === 'cv') {
if (t.idx >= 0 && t.idx < NUM_CV) this.cvVals[t.idx] = cvToWire(mapped); if (t.idx >= 0 && t.idx < NUM_CV) this.cvVals[t.idx] = cvToWire(mapOutput(routed[i], m));
} else if (t.idx >= 0 && t.idx < 3) { } else if (t.idx >= 0 && t.idx < 3) {
if (mapped >= (this.specs[i]?.gateThreshold ?? 0.5)) gates |= 1 << t.idx; const spec = this.specs[i];
const on =
spec?.gateSource === 'threshold'
? mapOutput(routed[i], m) >= (spec.gateThreshold ?? 0.5)
: this.seqGate(spec?.seqTrack ?? 0, routed);
if (on) gates |= 1 << t.idx;
} }
} }
@ -243,8 +332,25 @@ export class UseqCvBackend implements OutputBackend {
}); });
} }
/**
* Gate level for RatioSeq `track`, evaluated at most once per tick. The track's
* 7 params are the rhythm slice of the routed vector at [track*7 .. +6] — which
* for the MEMLCelium / SLP-Workshop engine are outputs [0..13] (its 2 tracks).
*/
private seqGate(track: number, routed: Float32Array): boolean {
if (track < 0 || track >= MAX_TRACKS) return false;
if (!this.trackDone[track]) {
const base = this.rhythmBases.length ? (this.rhythmBases[track] ?? -1) : track * 7;
this.trackGate[track] = base >= 0 && this.seq.evalTrack(track, decodeTrack(routed, base)).gate ? 1 : 0;
this.trackDone[track] = 1;
}
return this.trackGate[track] === 1;
}
private handleDisconnect(): void { private handleDisconnect(): void {
if (!this.port) return; if (!this.port) return;
this.clearHandshakeWatchdog();
this.handshook = false;
this.port = null; this.port = null;
this.writer = null; this.writer = null;
this.setStatus({ state: 'error', message: 'uSEQ disconnected — click Connect device' }); this.setStatus({ state: 'error', message: 'uSEQ disconnected — click Connect device' });
@ -252,10 +358,12 @@ export class UseqCvBackend implements OutputBackend {
async disconnect(): Promise<void> { async disconnect(): Promise<void> {
await this.closePort(); await this.closePort();
this.setStatus({ state: 'ready', message: 'uSEQ ready — click Connect device' }); this.setStatus({ state: 'idle', message: 'No uSEQ — click Connect device' });
} }
private async closePort(): Promise<void> { private async closePort(): Promise<void> {
this.clearHandshakeWatchdog();
this.handshook = false;
try { try {
this.reader?.cancel().catch(() => {}); this.reader?.cancel().catch(() => {});
this.writer?.releaseLock(); this.writer?.releaseLock();

View file

@ -0,0 +1,66 @@
/**
* RatioSeqEngine tests (bun test) — pin the gate generator against the C++
* engine's decode + ratio_seq semantics so the browser stays in parity.
*/
import { expect, test } from 'bun:test';
import { RatioSeqEngine, decodeTrack, ratioSeq } from './ratio-seq';
test('decodeTrack matches the C++ set_params decode', () => {
// params all 0.5 → ratios int(1.5)=1 +1 = 2; phasorMul muls[int(1.999..)&3]=muls[1]=2;
// phaseOff int(2.0)*0.25 = 0.5; ampRatios int(1.5)+1 = 2.
const d = decodeTrack([0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5]);
expect(d.ratios).toEqual([2, 2, 2]);
expect(d.ratioSum).toBe(6);
expect(d.phasorMul).toBe(2);
expect(d.phaseOff).toBe(0.5);
expect(d.ampRatios).toEqual([2, 2]);
expect(d.ampRatioSum).toBe(4);
});
test('decodeTrack extremes: 0 → minimum 1, ~1 → maximum 4', () => {
const lo = decodeTrack([0, 0, 0, 0, 0, 0, 0]);
expect(lo.ratios).toEqual([1, 1, 1]);
expect(lo.phasorMul).toBe(1); // muls[0]
expect(lo.phaseOff).toBe(0);
const hi = decodeTrack([0.99, 0.99, 0.99, 0.99, 0.5, 0.99, 0.99]);
expect(hi.ratios).toEqual([3, 3, 3]); // int(2.97)+1
expect(hi.phasorMul).toBe(8); // muls[int(3.95)&3=3]
});
test('ratioSeq: phasor 0 is on (start of first segment), pulse-width boundary', () => {
const ratios = [1, 1, 1];
const sum = 3;
expect(ratioSeq(0, sum, ratios, 0.5)).toBe(true); // beatPhase 0 ≤ 0.5
// Just inside segment 0: phaseAdj = 3*0.1 = 0.3, segment0 [0,1], beatPhase 0.3 ≤ 0.5 → on
expect(ratioSeq(0.1, sum, ratios, 0.5)).toBe(true);
// Late in segment 0: phaseAdj = 3*0.3 = 0.9, beatPhase 0.9 > 0.5 → off
expect(ratioSeq(0.3, sum, ratios, 0.5)).toBe(false);
});
test('clock advances a 4/4 bar at the set BPM and wraps', () => {
const seq = new RatioSeqEngine();
seq.setBpm(120); // bar = (60/120)*4 = 2 s
expect(seq.phase()).toBe(0);
seq.advance(0.5); // quarter of a bar
expect(seq.phase()).toBeCloseTo(0.25, 6);
seq.advance(2.0); // a full bar later → wraps back to 0.25
expect(seq.phase()).toBeCloseTo(0.25, 6);
});
test('evalTrack reports rising/falling edges across ticks', () => {
const seq = new RatioSeqEngine();
seq.setBpm(120);
const d = decodeTrack([0, 0, 0, 0, 0, 0.99, 0.99]); // ratios 1,1,1; phasorMul 1; phaseOff 0
// At phase 0 → gate on (rising on first eval).
const a = seq.evalTrack(0, d);
expect(a.gate).toBe(true);
expect(a.rising).toBe(true);
expect(a.falling).toBe(false);
expect(a.velocity).toBe(1); // ampRatios decode → high
// Advance past the pulse (into the off part of the cycle) → falling edge.
seq.advance(0.6); // 0.3 of the bar; phaseAdj = 3*0.3 = 0.9 > pw → off
const b = seq.evalTrack(0, d);
expect(b.gate).toBe(false);
expect(b.falling).toBe(true);
expect(b.rising).toBe(false);
});

View file

@ -0,0 +1,136 @@
/**
* RatioSeqEngine — browser-side gate sequencer, a faithful TS port of the
* MEMLCelium / SLP-Workshop engine's internal ratio sequencer
* (`nisps/engines/memlcelium.hpp` + `ratio_seq` in `nisps/engines/breakor.hpp`).
*
* It turns the **rhythm** slice of the model output vector — 7 params per track,
* exactly as the C++ engine decodes outputs [0..13] into its 2 sequences — into
* clock-driven gate events. This is the gate generator the spec calls for so the
* CV and MIDI backends can emit gate sequences without running the audio engine
* (docs/slp-workshop/SPEC.md §2). Pure + framework-neutral; unit-tested.
*
* Per-track raw params (each 0..1, in this order):
* [0,1,2] ratios → int(p*3)+1 (1..4)
* [3] phasorMul→ {1,2,4,8}[int(p*3.999999) & 3]
* [4] phaseOff → int(p*4) * 0.25 ({0,.25,.5,.75})
* [5,6] ampRatios→ int(p*3)+1 (1..4)
*
* Clock: a 4/4 bar phasor (matches `update_bpm`: bar = 4 beats); advance() moves
* it by dt/bar_seconds. Gate per track = `ratioSeq(seqPhasor, ratios, pw=0.5)`;
* a second ratio set picks a 2-level velocity (firmware parity: 127/64 → 1.0/0.5).
*/
const PULSE_WIDTH = 0.5; // firmware parity (per-track pulse width is a deferred extension)
const VELOCITY_HIGH = 1.0;
const VELOCITY_LOW = 64 / 127; // ≈0.504, mirrors the engine's 64/127
const PHASOR_MULS = [1, 2, 4, 8] as const;
/** Decoded per-track sequence parameters. */
export interface SeqParams {
ratios: [number, number, number];
ratioSum: number;
phasorMul: number;
phaseOff: number;
ampRatios: [number, number];
ampRatioSum: number;
}
/** Per-track evaluation result for one tick. */
export interface GateState {
/** Gate level — true while inside a pulse. */
gate: boolean;
/** 2-level velocity / accent in [0,1] for the current pulse. */
velocity: number;
/** Gate just went high this tick (note-on edge). */
rising: boolean;
/** Gate just went low this tick (note-off edge). */
falling: boolean;
}
/** Decode 7 raw params (starting at `off`) into sequence params (matches set_params). */
export function decodeTrack(p: ArrayLike<number>, off = 0): SeqParams {
const q = (i: number) => p[off + i] ?? 0;
const r0 = ((q(0) * 3) | 0) + 1;
const r1 = ((q(1) * 3) | 0) + 1;
const r2 = ((q(2) * 3) | 0) + 1;
const a0 = ((q(5) * 3) | 0) + 1;
const a1 = ((q(6) * 3) | 0) + 1;
return {
ratios: [r0, r1, r2],
ratioSum: r0 + r1 + r2,
phasorMul: PHASOR_MULS[((q(3) * 3.999999) | 0) & 3],
phaseOff: ((q(4) * 4) | 0) * 0.25,
ampRatios: [a0, a1],
ampRatioSum: a0 + a1,
};
}
/**
* The ratio sequencer pulse test (port of `ratio_seq` in breakor.hpp): carve the
* cycle into segments proportional to `ratios`; the segment the phasor lands in
* is "on" for its first `pulseWidth` fraction.
*/
export function ratioSeq(phasor: number, ratioSum: number, ratios: ArrayLike<number>, pulseWidth: number): boolean {
let offsetPhase = phasor;
if (offsetPhase >= 1) offsetPhase -= 1;
const phaseAdj = ratioSum * offsetPhase;
let accum = 0;
let last = 0;
for (let i = 0; i < ratios.length; i++) {
accum += ratios[i];
if (phaseAdj <= accum) {
const beatPhase = (phaseAdj - last) / (accum - last);
return beatPhase <= pulseWidth;
}
last = accum;
}
return false;
}
export class RatioSeqEngine {
private barPhasor = 0;
private bpm = 120;
private lastTrig: boolean[] = [];
/** Set tempo (BPM, 4/4). */
setBpm(bpm: number): void {
this.bpm = bpm > 0 ? bpm : 120;
}
/** Reset the clock + per-track edge memory (e.g. on stop / reconfigure). */
reset(): void {
this.barPhasor = 0;
this.lastTrig.length = 0;
}
/** Advance the bar phasor by `dtSeconds` of wall-clock time. */
advance(dtSeconds: number): void {
const barSeconds = (60 / this.bpm) * 4; // 4/4
this.barPhasor += dtSeconds / barSeconds;
if (this.barPhasor >= 1) this.barPhasor -= Math.floor(this.barPhasor);
}
/** Current bar phasor (0..1), for visualisation. */
phase(): number {
return this.barPhasor;
}
/**
* Evaluate one track. `idx` keys the rising/falling edge memory; `params` are
* already decoded (call {@link decodeTrack} on the rhythm output slice).
*/
evalTrack(idx: number, params: SeqParams): GateState {
let seqPhasor = this.barPhasor * params.phasorMul;
seqPhasor = (seqPhasor + params.phaseOff) % 1;
const trig = ratioSeq(seqPhasor, params.ratioSum, params.ratios, PULSE_WIDTH);
const highAmp = ratioSeq(seqPhasor, params.ampRatioSum, params.ampRatios, PULSE_WIDTH);
const prev = this.lastTrig[idx] ?? false;
this.lastTrig[idx] = trig;
return {
gate: trig,
velocity: highAmp ? VELOCITY_HIGH : VELOCITY_LOW,
rising: trig && !prev,
falling: !trig && prev,
};
}
}

View file

@ -21,6 +21,28 @@ import type { BackendContext, BackendStatus, OutputMapping } from './backend';
import type { BackendId, CvSpec, MidiCcSpec, OscSpec, VcvSpec } from '../dock/output-state'; import type { BackendId, CvSpec, MidiCcSpec, OscSpec, VcvSpec } from '../dock/output-state';
import { defaultCvSpec, defaultMidiSpec, defaultOscSpec, defaultVcvSpec } from '../dock/output-state'; import { defaultCvSpec, defaultMidiSpec, defaultOscSpec, defaultVcvSpec } from '../dock/output-state';
import { BackendManager } from './manager'; import { BackendManager } from './manager';
import { modeEngineId } from '../console/model';
/**
* Per-engine rhythm layout: how many native RatioSeq tracks the engine has and
* its real param count (where the net's spare outputs begin). Browser-only extra
* gate-sequence tracks borrow those spare outputs (up to the net width). These
* are fixed C++ engine facts (e.g. MEMLCelium: 2 sequences × 7 params at [0..13],
* 56 params total), NOT derivable from manifold's UI-param mock.
*/
const RHYTHM_LAYOUTS: Record<string, { nativeTracks: number; paramCount: number }> = {
memlcelium: { nativeTracks: 2, paramCount: 56 }, // also the slp_workshop engine
};
/** Build the track → output-base mapping for an engine (native + spare). */
function rhythmBasesFor(engineId: string, netOut: number): number[] {
const lay = RHYTHM_LAYOUTS[engineId];
if (!lay) return [];
const bases: number[] = [];
for (let t = 0; t < lay.nativeTracks; t++) bases.push(t * 7); // native rhythm params
for (let b = lay.paramCount; b + 7 <= netOut; b += 7) bases.push(b); // browser-only spare tracks
return bases;
}
export interface MidiSettings { export interface MidiSettings {
outputId: string | null; outputId: string | null;
@ -72,6 +94,7 @@ export function useBackendManager(
midiSettings: MidiSettings, midiSettings: MidiSettings,
oscSettings: OscSettings, oscSettings: OscSettings,
vcvSettings: VcvSettings, vcvSettings: VcvSettings,
bpm: number,
): UseBackendManager { ): UseBackendManager {
const managerRef = useRef<BackendManager | null>(null); const managerRef = useRef<BackendManager | null>(null);
const [status, setStatus] = useState<BackendStatus>({ state: 'idle', message: 'idle' }); const [status, setStatus] = useState<BackendStatus>({ state: 'idle', message: 'idle' });
@ -154,13 +177,19 @@ export function useBackendManager(
vcv.setVcvConfig(specs, { url: vcvSettings.url, sendRaw: vcvSettings.sendRaw }); vcv.setVcvConfig(specs, { url: vcvSettings.url, sendRaw: vcvSettings.sendRaw });
}, [manager, params, vcvSettings.url, vcvSettings.sendRaw]); }, [manager, params, vcvSettings.url, vcvSettings.sendRaw]);
// Push per-output uSEQ CV config (channel + gate threshold) whenever it changes. // Push per-output uSEQ CV config (channel + gate source/track/threshold) and
// the gate-sequencer tempo whenever they change.
useEffect(() => { useEffect(() => {
const cv = manager?.cv(); const cv = manager?.cv();
if (!cv) return; if (!cv) return;
const specs: CvSpec[] = params.map((p, i) => (p.cv as CvSpec | undefined) ?? defaultCvSpec(i)); const specs: CvSpec[] = params.map((p, i) => (p.cv as CvSpec | undefined) ?? defaultCvSpec(i));
cv.setCvConfig(specs); cv.setCvConfig(specs);
}, [manager, params]); cv.setBpm(bpm);
// Native rhythm tracks read the engine's real params; browser-only extra
// tracks borrow the net's spare outputs (the firmware stays at its native count).
const netOut = engine?.architecture.outputSize ?? 126;
cv.setRhythmLayout(rhythmBasesFor(modeEngineId(modeId), netOut));
}, [manager, params, bpm, modeId, engine]);
const cvConnect = () => void manager?.cv()?.connect(); const cvConnect = () => void manager?.cv()?.connect();
const cvIdentify = () => manager?.cv()?.identify(); const cvIdentify = () => manager?.cv()?.identify();

View file

@ -287,6 +287,7 @@ export function ConsoleApp({ focus: initialFocus = 'composite' }: ConsoleAppProp
{ outputId: midiOutputId, ccCount: midiCcCount }, { outputId: midiOutputId, ccCount: midiCcCount },
{ url: oscUrl, sendRaw: oscSendRaw }, { url: oscUrl, sendRaw: oscSendRaw },
{ url: vcvUrl, sendRaw: vcvSendRaw }, { url: vcvUrl, sendRaw: vcvSendRaw },
bpm,
); );
// VCV bridge: forward a verdict op to the module's embedded learner. No-op // VCV bridge: forward a verdict op to the module's embedded learner. No-op

View file

@ -45,8 +45,8 @@ export interface MFParam {
osc?: { path: string; rangeMin: number; rangeMax: number }; osc?: { path: string; rangeMin: number; rangeMax: number };
/** VCV backend spec ({ bipolar }). */ /** VCV backend spec ({ bipolar }). */
vcv?: { bipolar: boolean }; vcv?: { bipolar: boolean };
/** uSEQ CV/gate backend spec ({ channel, gateThreshold }). */ /** uSEQ CV/gate backend spec ({ channel, gateSource, seqTrack, gateThreshold }). */
cv?: { channel: string; gateThreshold: number }; cv?: { channel: string; gateSource: 'sequence' | 'threshold'; seqTrack: number; gateThreshold: number };
} }
export interface MFMode { export interface MFMode {

View file

@ -9,7 +9,7 @@
* inline config in OutputsBackendConfig; both write the same store. * inline config in OutputsBackendConfig; both write the same store.
*/ */
import type { MFParam } from '../console/model'; import type { MFParam } from '../console/model';
import type { BackendId, CvChannelId } from './output-state'; import type { BackendId, CvChannelId, CvSpec } from './output-state';
import { CV_CHANNELS, defaultCvSpec, defaultMidiSpec, defaultOscSpec } from './output-state'; import { CV_CHANNELS, defaultCvSpec, defaultMidiSpec, defaultOscSpec } from './output-state';
function num(s: string, fallback: number): number { function num(s: string, fallback: number): number {
@ -296,7 +296,7 @@ function CvChannelEditor({
</thead> </thead>
<tbody> <tbody>
{params.map((p, i) => { {params.map((p, i) => {
const c = (p.cv as { channel: CvChannelId; gateThreshold: number } | undefined) ?? defaultCvSpec(i); const c = (p.cv as CvSpec | undefined) ?? defaultCvSpec(i);
const isGate = c.channel.startsWith('gate'); const isGate = c.channel.startsWith('gate');
return ( return (
<tr key={i}> <tr key={i}>

View file

@ -17,7 +17,7 @@
*/ */
import { useEffect, useState } from 'react'; import { useEffect, useState } from 'react';
import type { ConsoleCtx } from '../console/types'; import type { ConsoleCtx } from '../console/types';
import type { BackendId, CvChannelId } from './output-state'; import type { BackendId, CvChannelId, CvSpec } from './output-state';
import { CV_CHANNELS, defaultCvSpec, defaultMidiSpec, defaultOscSpec, defaultVcvSpec } from './output-state'; import { CV_CHANNELS, defaultCvSpec, defaultMidiSpec, defaultOscSpec, defaultVcvSpec } from './output-state';
import { import {
applyPreset, applyPreset,
@ -587,8 +587,22 @@ function VcvConfig({ ctx }: { ctx: ConsoleCtx }) {
function CvConfig({ ctx }: { ctx: ConsoleCtx }) { function CvConfig({ ctx }: { ctx: ConsoleCtx }) {
const s = ctx.backendStatus; const s = ctx.backendStatus;
const statusColor = // Green ONLY when the module has actually talked back (handshake confirmed);
s.state === 'ready' ? 'var(--good)' : s.state === 'connecting' ? 'var(--warn)' : 'var(--danger)'; // amber while waiting, red on error, grey when nothing is connected.
const dotColor =
s.state === 'ready'
? 'var(--good)'
: s.state === 'connecting'
? 'var(--warn)'
: s.state === 'idle'
? 'var(--fg-mute)'
: 'var(--danger)';
const handshakeLabel =
s.state === 'ready'
? 'Module handshake OK'
: s.state === 'idle'
? 'Not connected'
: s.message;
return ( return (
<> <>
<SectionLabel>uSEQ device (USB serial)</SectionLabel> <SectionLabel>uSEQ device (USB serial)</SectionLabel>
@ -602,26 +616,56 @@ function CvConfig({ ctx }: { ctx: ConsoleCtx }) {
<button type="button" style={btn('var(--danger)')} onClick={ctx.cvDisconnect}> <button type="button" style={btn('var(--danger)')} onClick={ctx.cvDisconnect}>
Disconnect Disconnect
</button> </button>
<span style={{ fontSize: 9, color: statusColor }}>{s.message}</span> </div>
<div
style={{
display: 'flex',
alignItems: 'center',
gap: 7,
padding: '4px 8px',
background: 'var(--bg-2)',
border: '1px solid var(--line)',
borderRadius: 'var(--r-1)',
}}
title={s.message}
>
<span
style={{
width: 10,
height: 10,
borderRadius: '50%',
flex: '0 0 auto',
background: dotColor,
boxShadow: s.state === 'ready' ? `0 0 6px ${dotColor}` : 'none',
}}
/>
<span style={{ fontSize: 'var(--fs-xs)', fontFamily: 'var(--font-mono)', color: dotColor }}>
{handshakeLabel}
</span>
</div> </div>
<p style={{ fontSize: 9, color: 'var(--fg-dim)', margin: 0, lineHeight: 1.6 }}> <p style={{ fontSize: 9, color: 'var(--fg-dim)', margin: 0, lineHeight: 1.6 }}>
Flash the uSEQ main + expander with <code>firmware/useq-celium</code>, connect over USB, then assign each Flash the uSEQ main + expander with <code>firmware/useq-celium</code>, connect over USB, then assign each
model output to a CV jack or gate. 11 CV (3 main + 8 expander) + 3 gates, streamed at 100&nbsp;Hz. model output to a CV jack or gate. 11 CV (3 main + 8 expander) + 3 gates, streamed at 100&nbsp;Hz.
</p> </p>
<SectionLabel>Per-output channel · gate threshold</SectionLabel> <SectionLabel>Per-output channel · gate source</SectionLabel>
<p style={{ fontSize: 9, color: 'var(--fg-dim)', margin: 0, lineHeight: 1.6 }}>
Gate channels run a clock-driven <b>Sequence</b> (RatioSeq track, tempo = app BPM) — tracks 0–1 are the
engine's native rhythm; tracks 2+ are browser-only extras on the net's spare outputs (up to ~12 total). Or
<b> Threshold</b> a continuous output. CV channels carry the mapped value.
</p>
<div style={{ maxHeight: 320, overflow: 'auto' }}> <div style={{ maxHeight: 320, overflow: 'auto' }}>
<table style={{ width: '100%', borderCollapse: 'collapse' }}> <table style={{ width: '100%', borderCollapse: 'collapse' }}>
<thead> <thead>
<tr> <tr>
<Th>Output</Th> <Th>Output</Th>
<Th>uSEQ channel</Th> <Th>uSEQ channel</Th>
<Th>Gate ≥</Th> <Th>Gate source</Th>
</tr> </tr>
</thead> </thead>
<tbody> <tbody>
{ctx.params.map((p, i) => { {ctx.params.map((p, i) => {
const c = (p.cv as { channel: CvChannelId; gateThreshold: number } | undefined) ?? defaultCvSpec(i); const c = (p.cv as CvSpec | undefined) ?? defaultCvSpec(i);
const isGate = c.channel.startsWith('gate'); const isGate = c.channel.startsWith('gate');
return ( return (
<tr key={i}> <tr key={i}>
@ -640,21 +684,57 @@ function CvConfig({ ctx }: { ctx: ConsoleCtx }) {
))} ))}
</select> </select>
</td> </td>
<td style={{ padding: '3px 6px', width: 80 }}> <td style={{ padding: '3px 6px', width: 200 }}>
<input {isGate ? (
type="number" <div style={{ display: 'flex', gap: 4, alignItems: 'center' }}>
min={0} <select
max={1} value={c.gateSource}
step={0.05} onChange={(e) =>
disabled={!isGate} ctx.setParam(i, { cv: { ...c, gateSource: e.target.value as 'sequence' | 'threshold' } })
style={{ ...cellInput, opacity: isGate ? 1 : 0.4 }} }
value={c.gateThreshold} style={{ ...cellInput, width: 'auto', cursor: 'pointer' }}
onChange={(e) => >
ctx.setParam(i, { <option value="sequence">Sequence</option>
cv: { ...c, gateThreshold: Math.max(0, Math.min(1, num(e.target.value, c.gateThreshold))) }, <option value="threshold">Threshold</option>
}) </select>
} {c.gateSource === 'sequence' ? (
/> <label style={{ display: 'flex', gap: 3, alignItems: 'center', fontSize: 9, color: 'var(--fg-dim)' }}>
trk
<input
type="number"
min={0}
max={15}
style={{ ...cellInput, width: 46 }}
value={c.seqTrack}
onChange={(e) =>
ctx.setParam(i, {
cv: { ...c, seqTrack: Math.max(0, Math.min(15, num(e.target.value, c.seqTrack) | 0)) },
})
}
/>
</label>
) : (
<label style={{ display: 'flex', gap: 3, alignItems: 'center', fontSize: 9, color: 'var(--fg-dim)' }}>
≥
<input
type="number"
min={0}
max={1}
step={0.05}
style={{ ...cellInput, width: 56 }}
value={c.gateThreshold}
onChange={(e) =>
ctx.setParam(i, {
cv: { ...c, gateThreshold: Math.max(0, Math.min(1, num(e.target.value, c.gateThreshold))) },
})
}
/>
</label>
)}
</div>
) : (
<span style={{ fontSize: 'var(--fs-xs)', color: 'var(--fg-mute)' }}>— CV —</span>
)}
</td> </td>
</tr> </tr>
); );

View file

@ -107,7 +107,16 @@ export const CV_CHANNELS: readonly CvChannelDesc[] = [
export interface CvSpec { export interface CvSpec {
/** Physical uSEQ channel this output drives, or 'none' to skip it. */ /** Physical uSEQ channel this output drives, or 'none' to skip it. */
channel: CvChannelId; channel: CvChannelId;
/** For gate channels: gate goes HIGH when the mapped 0..1 value ≥ this. */ /**
* For GATE channels: how the gate is produced.
* - 'sequence' → a clock-driven RatioSeq track (the rhythm stream; the
* track's 7 params come from outputs [seqTrack*7 .. +6]).
* - 'threshold' → the continuous stream: gate HIGH when mapped value ≥ gateThreshold.
*/
gateSource: 'sequence' | 'threshold';
/** RatioSeq track index driving this gate when gateSource==='sequence'. */
seqTrack: number;
/** Threshold on the mapped 0..1 value when gateSource==='threshold'. */
gateThreshold: number; gateThreshold: number;
} }
@ -185,5 +194,7 @@ export function defaultVcvSpec(): VcvSpec {
*/ */
export function defaultCvSpec(index: number): CvSpec { export function defaultCvSpec(index: number): CvSpec {
const ch = CV_CHANNELS[index]?.id ?? 'none'; const ch = CV_CHANNELS[index]?.id ?? 'none';
return { channel: ch, gateThreshold: 0.5 }; // Gate channels default to the rhythm stream (RatioSeq), one track per gate.
const gateNum = ch.startsWith('gate') ? parseInt(ch.slice(4), 10) - 1 : 0;
return { channel: ch, gateSource: 'sequence', seqTrack: gateNum, gateThreshold: 0.5 };
} }

36
scripts/flash-useq-expander.sh Executable file
View file

@ -0,0 +1,36 @@
#!/usr/bin/env bash
# Build + flash the uSEQ-CV **expander** firmware (firmware/useq-celium/expander).
# Target: uSEQ USEQHARDWARE_EXPANDER_OUT_0_1 (RP2040). Any extra args are passed
# to pio (e.g. --upload-port /dev/ttyACM1).
set -euo pipefail
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
BOARD_DIR="$SCRIPT_DIR/../firmware/useq-celium/expander"
ENV="expander"
if [[ "${1:-}" == "-h" || "${1:-}" == "--help" ]]; then
echo "Usage: scripts/flash-useq-expander.sh [extra pio args]"
echo " Builds firmware/useq-celium/expander and uploads it to the uSEQ EXPANDER board."
exit 0
fi
# Resolve PlatformIO (nix-friendly: fall back to an ephemeral nix-shell).
run_pio() {
if command -v pio >/dev/null 2>&1; then
pio "$@"
elif command -v platformio >/dev/null 2>&1; then
platformio "$@"
elif command -v nix-shell >/dev/null 2>&1; then
nix-shell -p platformio --run "pio $*"
else
echo "error: PlatformIO not found. Install it, e.g.:" >&2
echo " nix-shell -p platformio # or: pipx install platformio" >&2
exit 1
fi
}
echo "==> Build + flash uSEQ EXPANDER (env: $ENV)"
echo " If the upload can't auto-reset the board, hold BOOTSEL while plugging in USB."
cd "$BOARD_DIR"
run_pio run -e "$ENV" -t upload "$@"
echo "==> Done. The expander LEDs sweep when the main board forwards an Identify."

36
scripts/flash-useq-main.sh Executable file
View file

@ -0,0 +1,36 @@
#!/usr/bin/env bash
# Build + flash the uSEQ-CV **main** module firmware (firmware/useq-celium/main).
# Target: uSEQ USEQHARDWARE_1_0 (RP2040). Any extra args are passed to pio
# (e.g. --upload-port /dev/ttyACM0).
set -euo pipefail
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
BOARD_DIR="$SCRIPT_DIR/../firmware/useq-celium/main"
ENV="main"
if [[ "${1:-}" == "-h" || "${1:-}" == "--help" ]]; then
echo "Usage: scripts/flash-useq-main.sh [extra pio args]"
echo " Builds firmware/useq-celium/main and uploads it to the uSEQ MAIN board."
exit 0
fi
# Resolve PlatformIO (nix-friendly: fall back to an ephemeral nix-shell).
run_pio() {
if command -v pio >/dev/null 2>&1; then
pio "$@"
elif command -v platformio >/dev/null 2>&1; then
platformio "$@"
elif command -v nix-shell >/dev/null 2>&1; then
nix-shell -p platformio --run "pio $*"
else
echo "error: PlatformIO not found. Install it, e.g.:" >&2
echo " nix-shell -p platformio # or: pipx install platformio" >&2
exit 1
fi
}
echo "==> Build + flash uSEQ MAIN module (env: $ENV)"
echo " If the upload can't auto-reset the board, hold BOOTSEL while plugging in USB."
cd "$BOARD_DIR"
run_pio run -e "$ENV" -t upload "$@"
echo "==> Done. The main board's LEDs sweep on Identify from the Manifold CV panel."