Add glue/settings_view.hpp: wire_settings(mode) registers a "Joystick"
SingleSelectView on the MEMLNaut display carousel (TFT + rotary encoder, same
DisplayDriver as SystemView/SelfTest). For the 4-input two-joystick modes,
"Single" pins ML input channels 2,3 (the second joystick) to neutral via
ModeBase::set_input_pinned — the network is never rebuilt and trained state
survives toggling. Default is Dual. Only registered when input arity == 4.
Called from MEMLNaut-NISPS.ino setup() after addSystemInfoView(). MAP.md +
CLAUDE.md glue listings updated.
NOTE: compile-unverified — no arduino-cli/RP2350 toolchain on this host and no
hardware; needs scripts/build-firmware.sh + a flash test (chokepoint A).
Joystick -> MLP -> MIDI CC for an external hardware synth, using the
compile-time device templates from nisps/midi/generated. ExternalSynthMIDIMode
<const MidiDevice&, NOut> mirrors SoundAnalysisMIDIMode (NoOpEngine,
kRouteOutputsToEngine=false, pushes ControlChange events). A consteval
pick_cc_slots curates which NOut params fill the output slots (prefers musical
params over Bank Select/global). Adds six flashable variants
(MEMLNautModeExtSynth{Sub37,SubPhatty,Pro12,AnalogKeys,Hydrasynth,JD800}) wired
into mode_select.hpp + the .ino variant list + NISPS_ST guards, and a src/nisps/
midi symlink so the sketch tree can reach nisps/midi.
Host-compile-verified under C++20 (incl. via the sketch include path) and
lint-clean; full arduino-cli build + flash is on the hardware (no toolchain here.
Map enter/exit-explore, reroll, nudge, begin-place, commit-place to the
peripheral buttons via the shared FeedbackController. (Not compiled here —
no arduino-cli; Placing-audition static_output hook is a flagged follow-up.)
Move the Arduino sketch into firmware/MEMLNaut-NISPS/ and bridge the
hardware (memllib) to the platform-agnostic nisps/ library through a
slim glue layer. Delete the legacy root-level *AudioApp.hpp,
modes/MEMLNautMode*.hpp, voicespaces/, IMLInterface.hpp, XiasriAnalysis,
and the src/memlp submodule.
Glue layout (firmware/MEMLNaut-NISPS/glue/):
audio_driver.hpp - bridge memllib block callback to Mode::process
via per-Mode templated trampoline (no virtual dispatch)
peripherals.hpp - joystick/pots/buttons -> Mode::set_input + ML primitives
midi_io.hpp - MIDI in -> mode.note_on/update_bpm/set_playing,
drains mode ControlEvent ring -> MIDI UART
mode_select.hpp - using-aliases mapping MEMLNautMode<Name> to
nisps::modes::*Mode (build script rewrites the
#define MEMLNAUT_MODE_TYPE line)
input_router.hpp / output_router.hpp - top-level wire/drain entry points
The sketch tree uses src/{memllib,daisysp,nisps} symlinks because
Arduino-CLI rejects ".." in include paths from sketch-tree headers.
mode_select.hpp #undefs Arduino's sq/min/max/abs/round macros before
including nisps headers (some nisps engines use those identifiers as
method names). The audio bridge struct is extern in the header and
defined in the .ino because inline + __not_in_flash section attribute
collide at link time.
Verification: arduino-cli compile succeeds for PAFSynth, ChannelStrip,
and BreakOr (rp2040:rp2040:solderparty_rp2350_stamp_xl:opt=Optimize3,
-std=gnu++20). Host C++ tests under nisps/build still pass (3 binaries,
110+ tests). Build script (scripts/build-firmware.sh) updated to point
at the new sketch path; mode-rewrite logic unchanged.
Closes meml-gkm.
