- scripts/flash-useq-main.sh + scripts/flash-useq-expander.sh: build + flash
each uSEQ board via PlatformIO (nix-shell fallback for pio; extra args pass
through; BOOTSEL hint).
- CV backend: green status now means a CONFIRMED handshake, not just an open
port. Any valid device->host frame (the firmware streams INPUT at 20 Hz, or an
identify ack) flips it ready/green; a 2.5s watchdog after open surfaces a red
'no response from module' if nothing replies. idle/grey when nothing connected.
- Outputs panel CV config: explicit handshake indicator (coloured dot + label —
green 'Module handshake OK' / amber waiting / red error / grey not connected).
- Docs: firmware README + MAP.md note the scripts.
Restores the April-2026 "uSEQ-Celium" functionality (browser → uSEQ
hardware + CV expander over USB Web Serial) as a first-class Manifold
Outputs backend, and re-vendors the RP2040 firmware into the repo.
- protocol v2 (uSEQ-CV): firmware/useq-celium/shared/protocol.h is the
single source of truth, mirrored by manifold/src/backends/useq-protocol.ts.
26-byte OUTPUT frame, 11×u16 CV (12-bit) + 3-gate bitfield + XOR; fixed
topology; host-agnostic so the MEMLNaut RP2350 can emit identical bytes.
Spec in docs/useq-celium/protocol.md.
- firmware/useq-celium/{main,expander}: PlatformIO RP2040 firmware rewritten
to v2 from the real April pin maps (expander I2C addr 0x10).
- UseqCvBackend (id cvgate): Web Serial connect/identify/disconnect, 100 Hz
stream, per-channel dead-zone, gate thresholding; modeled on midi-backend.
Per-output CvSpec (channel + gateThreshold) on MFParam; config UI in
OutputsBackendConfig + BackendAdvanced; new "CV / uSEQ" top-dock mode.
- bun-test for the protocol frame layout; MAP.md updated.