One cut, no dual path. Closes ALIGNMENT defect 3 ("Arduino-CLI build
machinery is actively hostile") and vision bullet 4.
platformio.ini carries 16 [env:], one per variant, each passing
-DMEMLNAUT_MODE_TYPE; selftest passes -DNISPS_SELFTEST=1 instead. The env list
IS the registry now — the .ino comment-registry and the NISPS_ST_* token-paste
table are deleted rather than migrated. L12 noted that table was already
silently missing the currently-shipped SLPWorkshop variant, which is the whole
argument against having a second list.
Also deleted: the Python/sed machinery that rewrote the COMMITTED .ino on every
build, the sketch symlink forest, the global TFT_eSPI User_Setup.h mutation
(now -D flags — TFT_eSPI's own documented PlatformIO recipe), the UF2
boot-mount detection stack (upload_protocol=picotool talks to the bootloader
directly), and build-firmware-arch.sh entirely. Scripts 683 -> 435 lines.
memllib is vendored at lib/memllib/ from upstream e291192; no submodules
remain. VENDORED.md records provenance and the re-sync procedure.
S9: a firmware-build CI job compiles three representative envs against a cached
toolchain and reports per-variant flash/RAM. Firmware is in an automated gate
for the FIRST time. The old ci.yml comment justified excluding it as "low
verification value" — an assessment that did not survive contact, since the
SelfTest variant sat broken for an unknown period calling a DisplayDriver
method that did not exist at the pinned memllib commit, and nothing noticed
because nothing built it.
Verified: all 16 envs build from an empty cache, each within ~520 bytes of the
arduino-cli binary it replaces, flash and RAM. Measured as .text+.rodata /
.data+.bss+vector+uninitialized — NOT PlatformIO's console line, which
double-counts .data on this board. This does not prove the hardware boots; no
flash+smoke test was possible and that stays an operator chokepoint.
slpworkshop 248232/145028 pafsynth 256880/149716 selftest 216228/17960
(all 16 in the CI log format; none exceeds 2% of a 16 MB flash)
Two traps recorded so nobody rediscovers them: vendoring memllib's subdirs
without a src/ wrapper makes PlatformIO's library builder silently compile
NOTHING while still linking; and project build_flags land BEFORE the
framework's own -std=gnu++17 -Os, so build_unflags is required.
CORRECTION carried in this commit: the firmware sizes in c19d846's message and
the first version of the memllib recon doc were wrong — SLPWorkshop 145348,
PAFSynth 145300, SelfTest 141840. They came from building variants in sequence
through a SHARED incremental arduino-cli build directory, which reused stale
objects and under-reported by ~75 KB. Clean-cache rebuilds of the identical
commit give 216736/18492 for SelfTest. The real cost of the memllib upstream
bump is +216 bytes flash, not +316. Never measure firmware size through a
reused build dir.
HISTORY NOTE: this commit and the docs commit before it were rebuilt (force-push,
2026-07-21) so that each contains only what its message describes. The first
versions had the firmware deletions stranded in the docs commit by a shared-index
race between concurrent agents; content is byte-identical to the originals.
Gates: run-all-tests.sh ALL GREEN (nisps/ untouched by this change beyond
include paths); 16/16 pio envs build.
New "Modular" engine in a-immersive with three hot-swappable Faust
sub-engines (subtractive/additive/fm) sharing a common modulation pool:
16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw
wavemorph) routed through a 48-source x 10-destination matrix per
engine. Per-connection scalar amounts in [-1, 1], summed at each
destination. Default MLP output count is 512 (32 mod-source params +
480 matrix cells); model reinits on sub-engine swap, count change, or
engine-param exposure toggle.
Faust layer:
- mod-pool.lib: shared ADSR/LFO/source-bus library
- gen-modular-dsp.py: byte-reproducible generator (source of truth)
- modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs)
- modular-additive: 64-partial, spectral shape + formants, no envs/LFOs
- modular-fm: 4-op matrix + self-feedback, no envs
- All three share d08=amp, d09=pan conventions
- MODULAR_DESTINATIONS.md: authoritative destination table
JS layer:
- ModularEngine: self-contained SynthEngine with getState/setState,
setSubEngine, setModSourceCount, setExposeEngineParam
- modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers,
per-slot enable switches, matrix grid editor (tap-cycle, long-press
precise, right-click menu, negative amounts), preset overlay
- modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal,
DX bell, Morphing drone + default)
- a-app.js: Modular mode registered, paramMeta:change -> resizeMLP,
modular DSP state persisted under modularDspState, window.__nisps
debug hooks for programmatic control
Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing
including DSP state survives reload, sub-engine swap keeps paramCount,
preset apply verification).
Also fixes a pre-existing build.sh bug where the -e flag caused faust
to overwrite .wasm outputs with expanded DSP source text, leaving
additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all
affected engines with the corrected script. Added an early-message
buffer to faust-worklet-processor.js so setParam calls arriving before
wasm instantiation are queued rather than dropped (needed when the user
configures modular state before clicking Start Audio).
- Add window.__nisps debug probe (gated on ?debug=1) exposing iml state,
getOutputs/getLoss/getWeights/getExampleCount, and action triggers
(thumbsUp/thumbsDown/train/randomise/clearExamples/saveState)
- Fix WasmIML bug: this.dataset was a plain object; import Dataset and
use new Dataset(100) so computeWeights() is available for training
- Fix WasmIML.addExample/clearDataset to use Dataset API methods
- 44 Playwright e2e tests across 4 spec files:
- ml-engine.spec.js: WASM inference bounds, training loss, thumbs
up/down behavior, async training, example capture semantics
- ui-interactions.spec.js: drawer open/close, mode switching,
heatmap bar counts, preset chips, keyboard shortcuts (1/2/Z)
- input-pipeline.spec.js: input→output variation, clamping, joystick
drag, post-training output bounds across the full input space
- persistence.spec.js: URL params (?preset, ?spread), localStorage
round-trip, saveState probe
Browser-side OSCOutput module sends parameter values over WebSocket to
a companion Deno bridge script that converts them to OSC/UDP messages.
Enables controlling SuperCollider, Max/MSP, Pure Data, TouchDesigner,
or any OSC-capable software from the NISPS playground.
- Browser module (js/synth/osc-output.js): WebSocket client with
auto-reconnect, throttle (~20fps), and dead-zone filtering
- Deno bridge (osc-bridge/bridge.ts): zero-dependency, compiles to
standalone binaries via deno compile for Linux/macOS/Windows
- Test receiver (osc-bridge/test-receive.ts): terminal dashboard
showing live OSC parameter values with bar charts
- OSC pill button in floating bar for quick connect/disconnect
- Help modal section with platform-aware download, setup guide,
and examples for SuperCollider/PD/Max
- GitHub Actions workflow for cross-platform binary builds
- OSC sends in both visual and synth modes
