One cut, no dual path. Closes ALIGNMENT defect 3 ("Arduino-CLI build
machinery is actively hostile") and vision bullet 4.
platformio.ini carries 16 [env:], one per variant, each passing
-DMEMLNAUT_MODE_TYPE; selftest passes -DNISPS_SELFTEST=1 instead. The env list
IS the registry now — the .ino comment-registry and the NISPS_ST_* token-paste
table are deleted rather than migrated. L12 noted that table was already
silently missing the currently-shipped SLPWorkshop variant, which is the whole
argument against having a second list.
Also deleted: the Python/sed machinery that rewrote the COMMITTED .ino on every
build, the sketch symlink forest, the global TFT_eSPI User_Setup.h mutation
(now -D flags — TFT_eSPI's own documented PlatformIO recipe), the UF2
boot-mount detection stack (upload_protocol=picotool talks to the bootloader
directly), and build-firmware-arch.sh entirely. Scripts 683 -> 435 lines.
memllib is vendored at lib/memllib/ from upstream e291192; no submodules
remain. VENDORED.md records provenance and the re-sync procedure.
S9: a firmware-build CI job compiles three representative envs against a cached
toolchain and reports per-variant flash/RAM. Firmware is in an automated gate
for the FIRST time. The old ci.yml comment justified excluding it as "low
verification value" — an assessment that did not survive contact, since the
SelfTest variant sat broken for an unknown period calling a DisplayDriver
method that did not exist at the pinned memllib commit, and nothing noticed
because nothing built it.
Verified: all 16 envs build from an empty cache, each within ~520 bytes of the
arduino-cli binary it replaces, flash and RAM. Measured as .text+.rodata /
.data+.bss+vector+uninitialized — NOT PlatformIO's console line, which
double-counts .data on this board. This does not prove the hardware boots; no
flash+smoke test was possible and that stays an operator chokepoint.
slpworkshop 248232/145028 pafsynth 256880/149716 selftest 216228/17960
(all 16 in the CI log format; none exceeds 2% of a 16 MB flash)
Two traps recorded so nobody rediscovers them: vendoring memllib's subdirs
without a src/ wrapper makes PlatformIO's library builder silently compile
NOTHING while still linking; and project build_flags land BEFORE the
framework's own -std=gnu++17 -Os, so build_unflags is required.
CORRECTION carried in this commit: the firmware sizes in c19d846's message and
the first version of the memllib recon doc were wrong — SLPWorkshop 145348,
PAFSynth 145300, SelfTest 141840. They came from building variants in sequence
through a SHARED incremental arduino-cli build directory, which reused stale
objects and under-reported by ~75 KB. Clean-cache rebuilds of the identical
commit give 216736/18492 for SelfTest. The real cost of the memllib upstream
bump is +216 bytes flash, not +316. Never measure firmware size through a
reused build dir.
HISTORY NOTE: this commit and the docs commit before it were rebuilt (force-push,
2026-07-21) so that each contains only what its message describes. The first
versions had the firmware deletions stranded in the docs commit by a shared-index
race between concurrent agents; content is byte-identical to the originals.
Gates: run-all-tests.sh ALL GREEN (nisps/ untouched by this change beyond
include paths); 16/16 pio envs build.
The §7.5 decision was "rebase our commits onto upstream, then vendor". On
inspection there was no rebase to do, and the inventory that recommended it
(7a30da9) was wrong on two counts — both corrected in this commit.
All three fork commits touch only `examples/`. That directory is not in the
sketch symlink forest (firmware/MEMLNaut-NISPS/src/ links exactly audio,
hardware, interface, synth, utils, PicoDefs.hpp), so it is never compiled.
They existed to let the RL code build against nisps/core *while it was being
ported*, and that port is done — nisps/ml/{jolt,ou_noise,feedback,geo_push}.hpp
cite the upstream sources directly. Two of the 31 commits I flagged as
"work we are missing", `9fcd459 jolts` and `d0d8a72 noise`, are precisely the
ones already absorbed.
So the question was never rebase-or-not but which snapshot to vendor. Current
upstream, because the staleness was already costing us:
- upstream has DisplayDriver::NavigateToView; the pin does not. The SelfTest
variant called it and had been failing to compile (worked around in
b953681). It was written against a newer memllib, not against nothing.
- e291192 "l r input swap" is a hardware bug fix: the physical L/R input
sockets are wired to opposite codec ADC channels. Every mode on the old
pin sees its stereo input backwards.
Verified by building all three variants with arduino-cli:
SLPWorkshop 145348 flash (+320) 87388 RAM (+4)
PAFSynth 145300 flash (+312) 107060 RAM (+4)
SelfTest 141840 flash (+320) 12028 RAM (+4)
Exactly one compile error: the .ino used kSampleRate in a constexpr, and
upstream 1997699 made it a runtime `extern size_t` so a mode can pick its own
rate. constexpr -> const; it is a once-per-second diagnostic print. The uniform
+316 is the AudioDriver/DisplayDriver deltas — the bulky new upstream code
(GrainDelayI16, ReverbI16, ModFXI16, CCSelectView, RLView, VUMeterView,
PSRAMManager) is header-only and unreferenced, so the linker drops all of it.
.gitmodules points at upstream again: with the pin on an upstream commit, the
fork holds nothing the firmware compiles. Phase 0 pointed it at the fork only
because b37fc53 existed on no remote. The fork's feat/nisps-core-swap branch
stays pushed; nothing is destroyed.
Refs: plan §5, §7.5; ALIGNMENT Q4.
Phase 1 group 8 (S8, ST2, L14).
- S8: the vendored src/daisysp tree (96 files, 41 .cpp compiled into every
firmware build) and its sketch-tree symlink. Zero consumers — nisps replaced
daisysp's PitchShifter with a custom granular implementation. Corrected
firmware/README.md and setup-firmware-toolchain.sh, which called it a live
submodule. The attribution comment in nisps/dsp/pitch_shift.hpp stays: it is
an honest provenance note about a port, not a dependency.
Noted while verifying: src/memllib/examples/KassiaAudioApp includes
../../daisysp/..., but examples/ is not symlinked into the sketch tree and is
never compiled by the firmware build, so the deletion stands.
- ST2: input_router.hpp was a zero-logic speculative layer with one consumer;
the .ino now calls bind_peripherals directly.
- L14: peripherals.hpp — deleted kAnalogInputCount, PeripheralBindings and the
unused spread local, and extracted the duplicated commit-and-train block into
one helper. The audit's suggested commit_and_train(mode, feedback) signature
could NOT be behaviour-identical: repositioning() implies placing() (both
live in ExploreState::Placing), so dispatching on feedback state inside the
helper would silently reroute a TogB2 press mid-reposition from commit_place
to commit_reposition, which differs (no snapshot restore, clears
reposition_). Implemented as commit_and_train(mode, feedback, bool
reposition) with the branch decided at the call site, preserving behaviour.
Firmware is not compiled by any gate yet (that arrives with the PlatformIO
migration, plan §5/S9), so this group is verified by reading and grep only.
Gates: run-all-tests.sh ALL GREEN.
New SLP-Workshop firmware variant (Synth Library Portland), built on the
MEMLCelium engine + MLP shape. Ports the two post-fork learning-algorithm
changes from upstream memllib InterfaceRL into the shared nisps/ml core,
runtime-configurable (no compile-time switch), inert by default:
- nisps/ml/jolt.hpp: Jolt — held continuous weight morph over the flat
weight buffer + post-release LR ramp (kJolt* constants verbatim).
- nisps/ml/ou_noise.hpp: OUNoise<N> — Ornstein-Uhlenbeck exploration walk
on the output vector (theta=0.02, dt=0.001, kMaxAmplitude=0.65).
Both wired into ModeBase so every mode gains jolt_press/jolt_release/
jolt_lr_scale + set_explore_intensity; gated so existing modes stay
bit-identical (parity + golden tests green). Firmware surfaces them on
TogB1 (Jolt) and RVX1 (explore). New SLPWorkshopMode mode + schema +
codegen; firmware alias + .ino variant; playground mode registration.
Tests: jolt + OU unit tests, ModeBase learning integration incl. an
inert-parity test proving SLP-Workshop == MEMLCelium with features off.
Verified: cpp tests, wasm build, native↔wasm parity, lint, codegen
golden, playground typecheck. Firmware compile/e2e/hardware are
environment-bound (no arduino-cli/submodules/browser here).
Refs ergo 019f0fca.
Add glue/settings_view.hpp: wire_settings(mode) registers a "Joystick"
SingleSelectView on the MEMLNaut display carousel (TFT + rotary encoder, same
DisplayDriver as SystemView/SelfTest). For the 4-input two-joystick modes,
"Single" pins ML input channels 2,3 (the second joystick) to neutral via
ModeBase::set_input_pinned — the network is never rebuilt and trained state
survives toggling. Default is Dual. Only registered when input arity == 4.
Called from MEMLNaut-NISPS.ino setup() after addSystemInfoView(). MAP.md +
CLAUDE.md glue listings updated.
NOTE: compile-unverified — no arduino-cli/RP2350 toolchain on this host and no
hardware; needs scripts/build-firmware.sh + a flash test (chokepoint A).
Joystick -> MLP -> MIDI CC for an external hardware synth, using the
compile-time device templates from nisps/midi/generated. ExternalSynthMIDIMode
<const MidiDevice&, NOut> mirrors SoundAnalysisMIDIMode (NoOpEngine,
kRouteOutputsToEngine=false, pushes ControlChange events). A consteval
pick_cc_slots curates which NOut params fill the output slots (prefers musical
params over Bank Select/global). Adds six flashable variants
(MEMLNautModeExtSynth{Sub37,SubPhatty,Pro12,AnalogKeys,Hydrasynth,JD800}) wired
into mode_select.hpp + the .ino variant list + NISPS_ST guards, and a src/nisps/
midi symlink so the sketch tree can reach nisps/midi.
Host-compile-verified under C++20 (incl. via the sketch include path) and
lint-clean; full arduino-cli build + flash is on the hardware (no toolchain here.
Map enter/exit-explore, reroll, nudge, begin-place, commit-place to the
peripheral buttons via the shared FeedbackController. (Not compiled here —
no arduino-cli; Placing-audition static_output hook is a flagged follow-up.)
Move the Arduino sketch into firmware/MEMLNaut-NISPS/ and bridge the
hardware (memllib) to the platform-agnostic nisps/ library through a
slim glue layer. Delete the legacy root-level *AudioApp.hpp,
modes/MEMLNautMode*.hpp, voicespaces/, IMLInterface.hpp, XiasriAnalysis,
and the src/memlp submodule.
Glue layout (firmware/MEMLNaut-NISPS/glue/):
audio_driver.hpp - bridge memllib block callback to Mode::process
via per-Mode templated trampoline (no virtual dispatch)
peripherals.hpp - joystick/pots/buttons -> Mode::set_input + ML primitives
midi_io.hpp - MIDI in -> mode.note_on/update_bpm/set_playing,
drains mode ControlEvent ring -> MIDI UART
mode_select.hpp - using-aliases mapping MEMLNautMode<Name> to
nisps::modes::*Mode (build script rewrites the
#define MEMLNAUT_MODE_TYPE line)
input_router.hpp / output_router.hpp - top-level wire/drain entry points
The sketch tree uses src/{memllib,daisysp,nisps} symlinks because
Arduino-CLI rejects ".." in include paths from sketch-tree headers.
mode_select.hpp #undefs Arduino's sq/min/max/abs/round macros before
including nisps headers (some nisps engines use those identifiers as
method names). The audio bridge struct is extern in the header and
defined in the .ino because inline + __not_in_flash section attribute
collide at link time.
Verification: arduino-cli compile succeeds for PAFSynth, ChannelStrip,
and BreakOr (rp2040:rp2040:solderparty_rp2350_stamp_xl:opt=Optimize3,
-std=gnu++20). Host C++ tests under nisps/build still pass (3 binaries,
110+ tests). Build script (scripts/build-firmware.sh) updated to point
at the new sketch path; mode-rewrite logic unchanged.
Closes meml-gkm.
