Implements the spec's rhythm stream for the uSEQ CV backend, on the existing
slp_workshop/MEMLCelium engine (its outputs [0..13] are the 2 RatioSeq tracks).
- ratio-seq.ts: faithful TS port of the engine's gate generator (decode 7
params/track, ratio_seq pulse test, 4/4 bar clock). Unit-tested (5 tests).
- CV backend: gate channels run as a clock-driven Sequence (RatioSeq track from
the rhythm output slice [track*7..]) or a continuous Threshold; BPM-synced to
the app tempo; one eval per track per tick.
- CvSpec gains gateSource ('sequence'|'threshold') + seqTrack; per-gate UI in
the Outputs panel; bpm threaded through useBackendManager.
Next (spec Build Deltas): MIDI note on/off from gate edges; gate-sequence count
+ shared/separate-net toggle + per-input-channel routing; engine 2nd MLP head.
- scripts/flash-useq-main.sh + scripts/flash-useq-expander.sh: build + flash
each uSEQ board via PlatformIO (nix-shell fallback for pio; extra args pass
through; BOOTSEL hint).
- CV backend: green status now means a CONFIRMED handshake, not just an open
port. Any valid device->host frame (the firmware streams INPUT at 20 Hz, or an
identify ack) flips it ready/green; a 2.5s watchdog after open surfaces a red
'no response from module' if nothing replies. idle/grey when nothing connected.
- Outputs panel CV config: explicit handshake indicator (coloured dot + label —
green 'Module handshake OK' / amber waiting / red error / grey not connected).
- Docs: firmware README + MAP.md note the scripts.
Restores the April-2026 "uSEQ-Celium" functionality (browser → uSEQ
hardware + CV expander over USB Web Serial) as a first-class Manifold
Outputs backend, and re-vendors the RP2040 firmware into the repo.
- protocol v2 (uSEQ-CV): firmware/useq-celium/shared/protocol.h is the
single source of truth, mirrored by manifold/src/backends/useq-protocol.ts.
26-byte OUTPUT frame, 11×u16 CV (12-bit) + 3-gate bitfield + XOR; fixed
topology; host-agnostic so the MEMLNaut RP2350 can emit identical bytes.
Spec in docs/useq-celium/protocol.md.
- firmware/useq-celium/{main,expander}: PlatformIO RP2040 firmware rewritten
to v2 from the real April pin maps (expander I2C addr 0x10).
- UseqCvBackend (id cvgate): Web Serial connect/identify/disconnect, 100 Hz
stream, per-channel dead-zone, gate thresholding; modeled on midi-backend.
Per-output CvSpec (channel + gateThreshold) on MFParam; config UI in
OutputsBackendConfig + BackendAdvanced; new "CV / uSEQ" top-dock mode.
- bun-test for the protocol frame layout; MAP.md updated.
- mf-slider-input fill used calc(var(--mf-pct)*100%) but three consumers
(OutputControlRow held slider, OutputEditor, shared-ui Field) never set
--mf-pct, so the coloured track-fill stayed empty while only the native
thumb moved. Set --mf-pct inline on all three; harden the base class
(appearance:none + transparent bg + --mf-pct fallback + moz-range-progress).
- hide the two concentric noise-cap exploration rings around the input dot.
Adds a device picker to the MIDI backend config: choose an external synth
(Moog Sub 37, Hydrasynth, etc.), see its parameters grouped and BY NAME with
their CC numbers, tick which ones to control, and Apply — fills the per-output
CC table (CC#/channel/name) and sets the CC count from the template. Clamps to
the engine output count. Self-contained (local state + setParam/setMidiCcCount);
the result lives in the shared params store, so the existing named-preset bar
saves/restores it. Sourced from manifold/src/midi-devices (codegen).
Adds the Manifold app (manifold/) — the convertible-mode React front-end on
the real NISPS ML+audio engine, served live at meml.lnfinitemonkeys.org/next/.
Console chrome trimmed per UI pass:
- drop mode label + subtitle from the top-left overlay (keep MEMLNaut wordmark)
- remove the composite split preset/ratio readout (top-centre)
- remove the OUTPUT corner tag above the bars
- remove the A/B compare toggle from the verdict cluster
- remove the follow button + input/noise readout (bottom-left)
- remove AltitudeNav focus switcher (bottom-right)