memlnaut-nisps/tests/e2e/modular-mode.spec.js

295 lines
12 KiB
JavaScript
Raw Normal View History

feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
/**
* Modular mode e2e tests.
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
*
* These tests exercise the modular engine end-to-end via the debug probe
* (?debug=1, window.__nisps).
*
* NB: modular paramMeta = 4 ADSR × 4 + 8 LFO × 2 + 48 × 10 matrix = 512.
* Every matrix cell is in paramMeta so `modular-ui.updateLive()` can
* mirror live MLP outputs into the matrix DOM. Silence-on-joystick
* regressions are prevented at the DSP level: each sub-engine's
* `amp_val = clamp(base_amp + max(0, mod_amp))`, so matrix d08_amp
* cells can only add to the amp floor and base_amp=1.0 (default)
* keeps the voice audible regardless of what the MLP outputs.
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
*/
const { test, expect } = require('@playwright/test');
const { loadApp } = require('./helpers');
/**
* Switch the active engine to `modular` via the engine-switcher UI.
* Waits until window.__nisps.activeEngineId === 'modular'.
*/
async function switchToModular(page) {
// Open the synth drawer first (needed to see the engine cards).
const drawer = page.locator('#drawer-synth');
if (await drawer.evaluate(el => el.classList.contains('hidden'))) {
await page.click('[data-drawer="synth"]');
}
page.once('dialog', d => d.accept());
await page.click('.engine-card[data-engine-id="modular"]');
// Wait until setActiveEngine completes AND the modular dock icon becomes
// visible — the dock icon is revealed from the tail end of setActiveEngine
// so this guarantees the initial modular-ui.refresh() restore pass has run.
// Without this we race: test code can fire before modularUI.show()
// reaches refresh()'s pendingRestore branch, which then wipes the test's
// subsequent sub-engine swap.
await page.waitForFunction(
() => window.__nisps?.activeEngineId === 'modular',
null,
{ timeout: 20_000 }
);
await page.waitForFunction(
() => !document.querySelector('.dock-icon[data-drawer="modular"]')?.classList.contains('hidden'),
null,
{ timeout: 20_000 }
);
// Also yield one extra microtask so any synchronous deferred work queued
// inside setActiveEngine settles before we start poking the engine.
await page.evaluate(() => new Promise(r => setTimeout(r, 0)));
}
test.describe('Modular mode', () => {
test('switching to modular yields paramCount = 512', async ({ page }) => {
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
await loadApp(page);
await switchToModular(page);
const count = await page.evaluate(() => window.__nisps.paramCount);
// 4 ADSR × (attack, decay, sustain, release) = 16
// 8 LFO × (rate, morph) = 16
// 48 × 10 matrix cells = 480
expect(count).toBe(512);
});
test('matrix cells are in paramMeta so modular-ui updateLive can read them', async ({ page }) => {
// Regression guard: modular-ui.js `updateLive()` depends on every
// matrix cell being present in paramMeta so it can map MLP output
// indices to cell DOM. A previous fix that gated matrix cells on
// an opt-in flag broke the matrix UI's live visualisation when the
// joystick moved. If this test fails, inspect _rebuildParamMeta().
await loadApp(page);
await switchToModular(page);
const info = await page.evaluate(() => {
const meta = window.__nisps.activeEngine.paramMeta;
const matrix = meta.filter(m => m.group && m.group.startsWith('Matrix/'));
const destBuckets = {};
for (const m of matrix) {
const d = m.group.split('/')[1];
destBuckets[d] = (destBuckets[d] || 0) + 1;
}
return { total: meta.length, matrixCount: matrix.length, destBuckets };
});
expect(info.total).toBe(512);
expect(info.matrixCount).toBe(480);
// 10 destinations × 48 sources each
expect(Object.keys(info.destBuckets).length).toBe(10);
for (const count of Object.values(info.destBuckets)) {
expect(count).toBe(48);
}
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
});
test('debug probe exposes modular hooks', async ({ page }) => {
await loadApp(page);
await switchToModular(page);
const hooks = await page.evaluate(() => ({
hasGet: typeof window.__nisps.getModularState === 'function',
hasSet: typeof window.__nisps.setModularState === 'function',
hasSwap: typeof window.__nisps.setModularSubEngine === 'function',
hasPreset: typeof window.__nisps.applyModularPreset === 'function',
hasCounts: typeof window.__nisps.setModularSourceCount === 'function',
presetList: window.__nisps.listModularPresets?.()?.length ?? 0,
}));
expect(hooks.hasGet).toBe(true);
expect(hooks.hasSet).toBe(true);
expect(hooks.hasSwap).toBe(true);
expect(hooks.hasPreset).toBe(true);
expect(hooks.hasCounts).toBe(true);
expect(hooks.presetList).toBe(6);
});
test('sub-engine swap keeps paramCount = 512', async ({ page }) => {
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
await loadApp(page);
await switchToModular(page);
for (const sub of ['additive', 'fm', 'subtractive']) {
await page.evaluate(async (id) => {
await window.__nisps.setModularSubEngine(id);
}, sub);
const info = await page.evaluate(() => ({
paramCount: window.__nisps.paramCount,
subId: window.__nisps.activeEngine?.activeSubEngineId,
}));
expect(info.subId).toBe(sub);
expect(info.paramCount).toBe(512);
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
}
});
test('destNames differ between sub-engines', async ({ page }) => {
await loadApp(page);
await switchToModular(page);
const sub = await page.evaluate(() => window.__nisps.activeEngine?.destNames);
await page.evaluate(async () => {
await window.__nisps.setModularSubEngine('fm');
});
const fm = await page.evaluate(() => window.__nisps.activeEngine?.destNames);
expect(sub).toBeTruthy();
expect(fm).toBeTruthy();
expect(sub).toEqual(['pitch','osc2_detune','osc3_detune','osc_mix_bal','noise_level','cutoff','resonance','filter_env_amt','amp','pan']);
expect(fm[1]).toBe('op1_level'); // fm-specific
expect(sub).not.toEqual(fm);
});
test('ADSR count change rebuilds paramMeta', async ({ page }) => {
await loadApp(page);
await switchToModular(page);
const baseline = await page.evaluate(() => window.__nisps.paramCount);
expect(baseline).toBe(512);
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
await page.evaluate(() => window.__nisps.setModularSourceCount(6, 8));
const after = await page.evaluate(() => window.__nisps.paramCount);
// 6 ADSR × 4 + 8 LFO × 2 + 48 × 10 = 24 + 16 + 480 = 520
expect(after).toBe(520);
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
await page.evaluate(() => window.__nisps.setModularSourceCount(4, 8));
const reset = await page.evaluate(() => window.__nisps.paramCount);
expect(reset).toBe(512);
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
});
test('getState returns a snapshot with raw dsp values', async ({ page }) => {
await loadApp(page);
await switchToModular(page);
const snap = await page.evaluate(() => window.__nisps.getModularState());
expect(snap).toBeTruthy();
expect(snap.version).toBe(1);
expect(snap.subEngine).toBe('subtractive');
expect(typeof snap.dsp).toBe('object');
// Default patch pre-arms ADSR1 but does not route it to amp — voice
// stays audible because base_amp defaults to 1.0.
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
expect(snap.dsp['MM_ADSR/00_adsr01_enable']).toBeCloseTo(1.0, 4);
expect(snap.dsp['4_Master/04_base_amp']).toBeCloseTo(1.0, 4);
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
});
test('matrix cell persistence across setState', async ({ page }) => {
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
await loadApp(page);
await switchToModular(page);
// Pick a distinctive cell: ADSR2 (s=1) → cutoff (d=5) on subtractive.
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
await page.evaluate(() => {
const engine = window.__nisps.activeEngine;
const idx = engine.paramMeta.findIndex(m =>
m.label === 'MM_Matrix/s01_d05_cutoff');
if (idx < 0) throw new Error('no s01_d05_cutoff cell in paramMeta');
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
// paramMeta min=-1 max=1; 0.9 in norm = 0.8 raw.
engine.setParam(idx, 0.9);
});
const snap = await page.evaluate(() => window.__nisps.getModularState());
expect(snap.dsp['MM_Matrix/s01_d05_cutoff']).toBeCloseTo(0.8, 4);
// Mutate further, then restore.
await page.evaluate(() => {
const engine = window.__nisps.activeEngine;
const idx = engine.paramMeta.findIndex(m =>
m.label === 'MM_Matrix/s01_d05_cutoff');
engine.setParam(idx, 0.1);
});
const midSnap = await page.evaluate(() => window.__nisps.getModularState());
expect(midSnap.dsp['MM_Matrix/s01_d05_cutoff']).not.toBeCloseTo(0.8, 4);
await page.evaluate(async (s) => {
await window.__nisps.setModularState(s);
}, snap);
const restored = await page.evaluate(() => window.__nisps.getModularState());
expect(restored.dsp['MM_Matrix/s01_d05_cutoff']).toBeCloseTo(0.8, 4);
});
test('modular DSP state survives a page reload', async ({ page }) => {
// NOTE: don't use loadApp() because it installs an addInitScript that
// clears nisps-a-immersive on every navigation — including our reload.
// Replicate loadApp's bootstrap inline, using a localStorage sentinel
// (NOT window.__x) so the "first nav only" guard survives subsequent
// navigations on the same origin.
await page.addInitScript(() => {
if (!localStorage.getItem('__nisps-test-bootstrapped')) {
localStorage.setItem('__nisps-test-bootstrapped', '1');
localStorage.removeItem('nisps-a-immersive');
}
localStorage.setItem('nisps-help-seen', '1');
});
await page.goto('/a-immersive.html?debug=1');
await page.waitForFunction(() => window.__nisps !== undefined, { timeout: 20_000 });
await switchToModular(page);
// Set a distinctive value, save, then reload the page (localStorage
// is now preserved across the nav because __nispsTestBootstrapped is set).
await page.evaluate(() => {
const engine = window.__nisps.activeEngine;
engine._setRawByLabel('3_Filter/01_resonance', 0.73);
});
await page.evaluate(() => window.__nisps.saveState());
await page.goto('/a-immersive.html?debug=1');
await page.waitForFunction(() => window.__nisps !== undefined, { timeout: 20_000 });
// Engine is deferred-constructed; clicking the modular card re-instantiates
// it and the pending DSP state should be applied before setActiveEngine.
await switchToModular(page);
const restored = await page.evaluate(() => window.__nisps.getModularState());
expect(restored).toBeTruthy();
expect(restored.dsp['3_Filter/01_resonance']).toBeCloseTo(0.73, 4);
});
test('preset apply: plucky bass sets the expected matrix routes', async ({ page }) => {
await loadApp(page);
await switchToModular(page);
const ok = await page.evaluate(async () => {
return await window.__nisps.applyModularPreset('modular-plucky-bass');
});
expect(ok).toBe(true);
const snap = await page.evaluate(() => window.__nisps.getModularState());
expect(snap.subEngine).toBe('subtractive');
// ADSR2 fast decay
expect(snap.dsp['MM_ADSR/01_adsr02_decay']).toBeCloseTo(0.15, 4);
// Matrix: ADSR2 (s01) → cutoff (d05) at raw 0.8
expect(snap.dsp['MM_Matrix/s01_d05_cutoff']).toBeCloseTo(0.8, 4);
// Filter cutoff moved to 400 Hz
expect(snap.dsp['3_Filter/00_cutoff']).toBeCloseTo(400, 2);
});
test('preset apply: DX bell swaps to fm sub-engine', async ({ page }) => {
await loadApp(page);
await switchToModular(page);
await page.evaluate(async () => {
await window.__nisps.applyModularPreset('modular-dx-bell');
});
const snap = await page.evaluate(() => window.__nisps.getModularState());
expect(snap.subEngine).toBe('fm');
expect(snap.dsp['MM_Matrix/s02_d03_op3_level']).toBeCloseTo(1.0, 4);
// paramCount should still be 512 after the cross-engine swap.
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
const count = await page.evaluate(() => window.__nisps.paramCount);
expect(count).toBe(512);
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
});
test('initial outputs are in [0,1] after modular swap', async ({ page }) => {
await loadApp(page);
await switchToModular(page);
// Set inputs so the MLP runs a forward pass.
await page.evaluate(() => window.__nisps.setInputs(0.3, 0.7));
const outputs = await page.evaluate(() => window.__nisps.getOutputs());
expect(outputs.length).toBe(512);
feat(playground): add Modular audio mode with shared mod pool New "Modular" engine in a-immersive with three hot-swappable Faust sub-engines (subtractive/additive/fm) sharing a common modulation pool: 16 ADSR slots + 32 LFO slots (single-knob sine->tri->square->saw wavemorph) routed through a 48-source x 10-destination matrix per engine. Per-connection scalar amounts in [-1, 1], summed at each destination. Default MLP output count is 512 (32 mod-source params + 480 matrix cells); model reinits on sub-engine swap, count change, or engine-param exposure toggle. Faust layer: - mod-pool.lib: shared ADSR/LFO/source-bus library - gen-modular-dsp.py: byte-reproducible generator (source of truth) - modular-subtractive: faithful Minimoog (3 osc, ladder filter, no envs) - modular-additive: 64-partial, spectral shape + formants, no envs/LFOs - modular-fm: 4-op matrix + self-feedback, no envs - All three share d08=amp, d09=pan conventions - MODULAR_DESTINATIONS.md: authoritative destination table JS layer: - ModularEngine: self-contained SynthEngine with getState/setState, setSubEngine, setModSourceCount, setExposeEngineParam - modular-ui: drawer with sub-engine toggle, ADSR/LFO count steppers, per-slot enable switches, matrix grid editor (tap-cycle, long-press precise, right-click menu, negative amounts), preset overlay - modular-presets: 6 named presets (Slow pad, Plucky bass, Crystal, DX bell, Morphing drone + default) - a-app.js: Modular mode registered, paramMeta:change -> resizeMLP, modular DSP state persisted under modularDspState, window.__nisps debug hooks for programmatic control Tests: tests/e2e/modular-mode.spec.js (11 Playwright tests, all passing including DSP state survives reload, sub-engine swap keeps paramCount, preset apply verification). Also fixes a pre-existing build.sh bug where the -e flag caused faust to overwrite .wasm outputs with expanded DSP source text, leaving additive/fm-matrix/eoc-* committed as invalid WebAssembly. Rebuilt all affected engines with the corrected script. Added an early-message buffer to faust-worklet-processor.js so setParam calls arriving before wasm instantiation are queued rather than dropped (needed when the user configures modular state before clicking Start Audio).
2026-04-11 07:34:41 +02:00
for (const v of outputs) {
expect(v).toBeGreaterThanOrEqual(0);
expect(v).toBeLessThanOrEqual(1);
}
});
});